A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Dodge
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

My Neon 1996 Keep stalling and giving me P0300 and p0301



 
 
Thread Tools Display Modes
  #1  
Old October 17th 08, 08:22 AM posted to alt.autos.dodge
michastef
external usenet poster
 
Posts: 2
Default My Neon 1996 Keep stalling and giving me P0300 and p0301

Hi, my neon 1996 keeps stalling after 30-60 minutes of driving and it
gives me the code P0300 and P0301, i change the spark plug and cleared
the code, no change, the code came back and it keep stalling, but only
when it’s hot.


Someone can help me?

Thanks a lot

Stef

--
Posted at author's request, using moderated http://www.AutoBoardz.com interface
Thread archive: http://www.AutoBoardz.com/Neon-1996-...ict249667.html
Ads
  #2  
Old October 17th 08, 09:50 AM posted to alt.autos.dodge
maxpower[_2_]
external usenet poster
 
Posts: 122
Default My Neon 1996 Keep stalling and giving me P0300 and p0301


"michastef" > wrote in message
news:1212800_aa35f2d034bdebeff02de5685072e4b1@auto boardz.com...
> Hi, my neon 1996 keeps stalling after 30-60 minutes of driving and it
> gives me the code P0300 and P0301, i change the spark plug and cleared
> the code, no change, the code came back and it keep stalling, but only
> when it's hot.
>
>
> Someone can help me?
>
> Thanks a lot
>
> Stef
>
> --
> Posted at author's request, using moderated http://www.AutoBoardz.com

interface
> Thread archive:

http://www.AutoBoardz.com/Neon-1996-...ict249667.html


Change the plug wires


  #3  
Old October 18th 08, 11:41 PM posted to alt.autos.dodge
Bryan Harris
external usenet poster
 
Posts: 1
Default My Neon 1996 Keep stalling and giving me P0300 and p0301

neons had a problem with oil leaks from head gasket. that oil soaked the
harness under the exhaust manifold. the crank sensor wiring is in that
location. the computer monitors the crank shaft speed to determine
misfires. if swapping the plug wires 1 and 4 doesnt change the misfire and
you have equal compression on all cylinders. that would be a good place to
look. that part of the harness is easy to repair since there are not that
many wires in that branch. also had the same problem near the cam sensor,
your problem is more likely to be from the crank then the cam area. the
wires would become fused together from the heat and oil the insulation would
break down and cause an intermitant stalling condition when hot. also check
your crank sensor for any leaks out of the connector. crank sensor is
located under the alt.
good luck.
Bryan

"michastef" > wrote in message
news:1212800_aa35f2d034bdebeff02de5685072e4b1@auto boardz.com...
> Hi, my neon 1996 keeps stalling after 30-60 minutes of driving and it
> gives me the code P0300 and P0301, i change the spark plug and cleared
> the code, no change, the code came back and it keep stalling, but only
> when it's hot.
>
>
> Someone can help me?
>
> Thanks a lot
>
> Stef
>
> --
> Posted at author's request, using moderated http://www.AutoBoardz.com
> interface
> Thread archive:
> http://www.AutoBoardz.com/Neon-1996-...ict249667.html



  #4  
Old November 3rd 08, 09:22 PM posted to alt.autos.dodge
michastef
external usenet poster
 
Posts: 2
Default My Neon 1996 Keep stalling and giving me P0300 and p0301

I changed the wire and the coil too, but the problem keep coming back,
i’m gonna check the wire of the crank sensor, thanks alot, for the
help, if my crank chaft sensor would be faulty, would’nt I have a
code that would light?

I ’ll try to check the wire and i’ll come back to tell you if it
works, thanks again :O)

"michastef" wrote:
> Hi, my neon 1996 keeps stalling after 30-60 minutes of driving
> and it gives me the code P0300 and P0301, i change the spark
> plug and cleared the code, no change, the code came back and
> it keep stalling, but only when it's hot.
>
>
> Someone can help me?
>
> Thanks a lot
>
> Stef

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
96 Neon (DOHC) Stalling grcox Dodge 1 October 13th 06 04:22 PM
1996 Neon stalling problems Curt Dodge 4 March 10th 06 02:21 PM
Chrysler T&C (1996) MiniVan (stalling) clantonab Chrysler 7 August 26th 05 08:17 PM
2000 neon stalling and stumble Brent Chrysler 1 July 5th 05 08:25 PM
1996 Neon stalling kangel55 Dodge 14 July 19th 04 06:11 PM


All times are GMT +1. The time now is 12:16 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.