92 Accord stalling at stop (in drive) after warm

This is a 91 or 92 accord. Automatic transmission.

After a minor collision, the radiator and headlight was replaced by my
friend (not a mechanic...) with instructions from the net.

Soon after that, (recently) he had this problem: (Not always, but
happened more than once)

After the engine warmed up by driving a short while, when stopped at a
light (transmission in DRIVE), brake pressed, the car would shake and
sometimes stall out. However, moving the trans. to Neutral, the
engine is fine. Putting it in drive after releasing the brake and the
car drives fine.

No strange noise otherwise when driven.

Any ideas? Unfortunately, the car is in another city driven by my
friend's wife. Thats the description I was given. They're trying
to determine if the car is safe to drive, and if its worth fixing.

eric wrote:
> This is a 91 or 92 accord. Automatic transmission.
>
> After a minor collision, the radiator and headlight was replaced by my
> friend (not a mechanic...) with instructions from the net.
>
> Soon after that, (recently) he had this problem: (Not always, but
> happened more than once)
>
> After the engine warmed up by driving a short while, when stopped at a
> light (transmission in DRIVE), brake pressed, the car would shake and
> sometimes stall out. However, moving the trans. to Neutral, the
> engine is fine. Putting it in drive after releasing the brake and the
> car drives fine.
>
> No strange noise otherwise when driven.
>
> Any ideas? Unfortunately, the car is in another city driven by my
> friend's wife. Thats the description I was given. They're trying
> to determine if the car is safe to drive, and if its worth fixing.


==========================

If it was a first generation CRV, and had that symptom, it could be
tight valves. Not sure how often the valves are supposed to be adjusted,
so check the owner's manual, and ask the dealer if there's any
'exceptions' to the manual for that year? ?

'Curly'

MAYBE BROKEN MOTOR MOUNT
when in drive (stopped) theres a load on drive train and sounds like the
mounts aren't totally absorbing energy (shaking) when driving the energy
has a place to go
shaking stops in neutral because theres no load on drivetrain...