If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
JTS exhaust
Best online shop for exhausts please...
I need a new back box for my 156 2002 2.0JTS. Its not the same as the TSpark exhaust system. The flexi pipe was the blowing part, so they welded a similar sized piece in and all is well, but there is only luck holding the rear silencer together at the mo! Local garage hunted round all over and finally ordered and tried to fit one, but the bore on (going into the silencer) was completely wrong. Around half the size of the bore on the car so they (re-assuringly) didn't fit it. If it can last another month or so, then I can get it done during service. I will try to get the part myself beforehand. Cheers, GT |
Ads |
#2
|
|||
|
|||
JTS exhaust
"GT" > wrote in message
... > Best online shop for exhausts please... > > I need a new back box for my 156 2002 2.0JTS. Its not the same as the > TSpark exhaust system. > > The flexi pipe was the blowing part, so they welded a similar sized piece > in and all is well, but there is only luck holding the rear silencer > together at the mo! > > Local garage hunted round all over and finally ordered and tried to fit > one, but the bore on (going into the silencer) was completely wrong. > Around half the size of the bore on the car so they (re-assuringly) didn't > fit it. If it can last another month or so, then I can get it done during > service. I will try to get the part myself beforehand. > > Cheers, > GT Its a 'kind of' triangular cross-section and has a large outlet bore on the rear. The V6 one looks like the same shape and bore, but that can't be right?!? http://www.alfaworkshop.co.uk/images...-158-1-800.jpg |
#3
|
|||
|
|||
JTS exhaust
GT wrote:
> Best online shop for exhausts please... > > I need a new back box for my 156 2002 2.0JTS. Its not the same as the TSpark > exhaust system. > > The flexi pipe was the blowing part, so they welded a similar sized piece in > and all is well, but there is only luck holding the rear silencer together > at the mo! > > Local garage hunted round all over and finally ordered and tried to fit one, > but the bore on (going into the silencer) was completely wrong. Around half > the size of the bore on the car so they (re-assuringly) didn't fit it. If it > can last another month or so, then I can get it done during service. I will > try to get the part myself beforehand. http://www.bodyshopwarehouse.co.uk/c...park-0600-1204 ? Thes guys are really good IME, but apparently not taking any orders ATM. Would be worth calling them up and finding what the score is. -- Catman MIB#14 SKoGA#6 TEAR#4 BOTAFOF#38 Apostle#21 COSOC#3 Tyger, Tyger Burning Bright (Remove rust to reply) 116 Giulietta 3.0l Sprint 1.7 145 2.0 Cloverleaf 156 V6 2.5 S2 Triumph Sprint ST 1050: It's blue, see. www.cuore-sportivo.co.uk |
#4
|
|||
|
|||
JTS exhaust
"Catman" > wrote in message
... > GT wrote: >> Best online shop for exhausts please... >> >> I need a new back box for my 156 2002 2.0JTS. Its not the same as the >> TSpark exhaust system. >> >> The flexi pipe was the blowing part, so they welded a similar sized piece >> in and all is well, but there is only luck holding the rear silencer >> together at the mo! >> >> Local garage hunted round all over and finally ordered and tried to fit >> one, but the bore on (going into the silencer) was completely wrong. >> Around half the size of the bore on the car so they (re-assuringly) >> didn't fit it. If it can last another month or so, then I can get it done >> during service. I will try to get the part myself beforehand. > > http://www.bodyshopwarehouse.co.uk/c...park-0600-1204 > > ? > > Thes guys are really good IME, but apparently not taking any orders ATM. > Would be worth calling them up and finding what the score is. I'll make a few calls tomorrow, but that is the TSpark system. I presume that the JTS system is different or otherwise the local garage guys should have found something that fits easily. So are bodyshopwarehouse good? I'll phone tomorrow. |
#5
|
|||
|
|||
JTS exhaust
"GT" > wrote in message
... > "GT" > wrote in message > ... >> Best online shop for exhausts please... >> >> I need a new back box for my 156 2002 2.0JTS. Its not the same as the >> TSpark exhaust system. >> >> The flexi pipe was the blowing part, so they welded a similar sized piece >> in and all is well, but there is only luck holding the rear silencer >> together at the mo! >> >> Local garage hunted round all over and finally ordered and tried to fit >> one, but the bore on (going into the silencer) was completely wrong. >> Around half the size of the bore on the car so they (re-assuringly) >> didn't fit it. If it can last another month or so, then I can get it done >> during service. I will try to get the part myself beforehand. >> >> Cheers, >> GT > > Its a 'kind of' triangular cross-section and has a large outlet bore on > the rear. > The V6 one looks like the same shape and bore, but that can't be right?!? > > http://www.alfaworkshop.co.uk/images...-158-1-800.jpg Actually having said that, the TSpark one looks the same in the photo! Like Catman says - I'll give them a call. |
#6
|
|||
|
|||
JTS exhaust
"GT" > wrote in message
... > Best online shop for exhausts please... > > I need a new back box for my 156 2002 2.0JTS. Its not the same as the > TSpark exhaust system. > > The flexi pipe was the blowing part, so they welded a similar sized piece > in and all is well, but there is only luck holding the rear silencer > together at the mo! > > Local garage hunted round all over and finally ordered and tried to fit > one, but the bore on (going into the silencer) was completely wrong. > Around half the size of the bore on the car so they (re-assuringly) didn't > fit it. If it can last another month or so, then I can get it done during > service. I will try to get the part myself beforehand. > > Cheers, > GT I read this forum page: http://www.alfaowner.com/Forum/alfa-...s-exhaust.html and found these: http://www.ebspares.co.uk/PNF.cfm?id...TOKEN=32193955 http://www.supersprintuk.com/supersp...meo-p-246.html Any comments? I'm not looking for 'boy racer' noisy, I just want a replacment exhaust that will give me a few years! Could I just fit the TSpark 2.5V6 pipes? |
#7
|
|||
|
|||
JTS exhaust
GT wrote:
> "GT" > wrote in message > ... >> Best online shop for exhausts please... >> >> I need a new back box for my 156 2002 2.0JTS. Its not the same as the >> TSpark exhaust system. >> >> The flexi pipe was the blowing part, so they welded a similar sized piece >> in and all is well, but there is only luck holding the rear silencer >> together at the mo! >> >> Local garage hunted round all over and finally ordered and tried to fit >> one, but the bore on (going into the silencer) was completely wrong. >> Around half the size of the bore on the car so they (re-assuringly) didn't >> fit it. If it can last another month or so, then I can get it done during >> service. I will try to get the part myself beforehand. >> >> Cheers, >> GT > > I read this forum page: > http://www.alfaowner.com/Forum/alfa-...s-exhaust.html > > and found these: > > http://www.ebspares.co.uk/PNF.cfm?id...TOKEN=32193955 > EB Spares have always been good for me. > http://www.supersprintuk.com/supersp...meo-p-246.html > > Any comments? I'm not looking for 'boy racer' noisy, I just want a > replacment exhaust that will give me a few years! Could I just fit the > TSpark 2.5V6 pipes? Pass -- Catman MIB#14 SKoGA#6 TEAR#4 BOTAFOF#38 Apostle#21 COSOC#3 Tyger, Tyger Burning Bright (Remove rust to reply) 116 Giulietta 3.0l Sprint 1.7 145 2.0 Cloverleaf 156 V6 2.5 S2 Triumph Sprint ST 1050: It's blue, see. www.cuore-sportivo.co.uk |
#8
|
|||
|
|||
JTS exhaust
GT wrote:
> "Catman" > wrote in message > ... >> GT wrote: >>> Best online shop for exhausts please... >>> >>> I need a new back box for my 156 2002 2.0JTS. Its not the same as the >>> TSpark exhaust system. >>> >>> The flexi pipe was the blowing part, so they welded a similar sized piece >>> in and all is well, but there is only luck holding the rear silencer >>> together at the mo! >>> >>> Local garage hunted round all over and finally ordered and tried to fit >>> one, but the bore on (going into the silencer) was completely wrong. >>> Around half the size of the bore on the car so they (re-assuringly) >>> didn't fit it. If it can last another month or so, then I can get it done >>> during service. I will try to get the part myself beforehand. >> http://www.bodyshopwarehouse.co.uk/c...park-0600-1204 >> >> ? >> >> Thes guys are really good IME, but apparently not taking any orders ATM. >> Would be worth calling them up and finding what the score is. > > I'll make a few calls tomorrow, but that is the TSpark system. I presume > that the JTS system is different or otherwise the local garage guys should > have found something that fits easily. So are bodyshopwarehouse good? I'll > phone tomorrow. > > I have always found them to be excellent. -- Catman MIB#14 SKoGA#6 TEAR#4 BOTAFOF#38 Apostle#21 COSOC#3 Tyger, Tyger Burning Bright (Remove rust to reply) 116 Giulietta 3.0l Sprint 1.7 145 2.0 Cloverleaf 156 V6 2.5 S2 Triumph Sprint ST 1050: It's blue, see. www.cuore-sportivo.co.uk |
#9
|
|||
|
|||
JTS exhaust
"Catman" > wrote in message
... > GT wrote: >> "GT" > wrote in message >> ... >>> Best online shop for exhausts please... >>> >>> I need a new back box for my 156 2002 2.0JTS. Its not the same as the >>> TSpark exhaust system. >>> >>> The flexi pipe was the blowing part, so they welded a similar sized >>> piece in and all is well, but there is only luck holding the rear >>> silencer together at the mo! >>> >>> Local garage hunted round all over and finally ordered and tried to fit >>> one, but the bore on (going into the silencer) was completely wrong. >>> Around half the size of the bore on the car so they (re-assuringly) >>> didn't fit it. If it can last another month or so, then I can get it >>> done during service. I will try to get the part myself beforehand. >>> >>> Cheers, >>> GT >> >> I read this forum page: >> http://www.alfaowner.com/Forum/alfa-...s-exhaust.html >> >> and found these: >> >> http://www.ebspares.co.uk/PNF.cfm?id...TOKEN=32193955 >> > > EB Spares have always been good for me. Sorry mate, one more... http://cgi.ebay.co.uk/Alfa-Romeo-156...d=p3286.c0.m14 Does this just look silly? Ebay seems just wrong for car parts! |
#10
|
|||
|
|||
JTS exhaust
GT wrote:
> "Catman" > wrote in message > ... >> GT wrote: >>> "GT" > wrote in message >>> ... >>>> Best online shop for exhausts please... >>>> >>>> I need a new back box for my 156 2002 2.0JTS. Its not the same as the >>>> TSpark exhaust system. >>>> >>>> The flexi pipe was the blowing part, so they welded a similar sized >>>> piece in and all is well, but there is only luck holding the rear >>>> silencer together at the mo! >>>> >>>> Local garage hunted round all over and finally ordered and tried to fit >>>> one, but the bore on (going into the silencer) was completely wrong. >>>> Around half the size of the bore on the car so they (re-assuringly) >>>> didn't fit it. If it can last another month or so, then I can get it >>>> done during service. I will try to get the part myself beforehand. >>>> >>>> Cheers, >>>> GT >>> I read this forum page: >>> http://www.alfaowner.com/Forum/alfa-...s-exhaust.html >>> >>> and found these: >>> >>> http://www.ebspares.co.uk/PNF.cfm?id...TOKEN=32193955 >>> >> EB Spares have always been good for me. > > Sorry mate, one more... > > http://cgi.ebay.co.uk/Alfa-Romeo-156...d=p3286.c0.m14 > > Does this just look silly? Ebay seems just wrong for car parts! > > Certainly more than I'd pay...... If you mean does it *look* silly when fitted, I'd probably say 'yes' -- Catman MIB#14 SKoGA#6 TEAR#4 BOTAFOF#38 Apostle#21 COSOC#3 Tyger, Tyger Burning Bright (Remove rust to reply) 116 Giulietta 3.0l Sprint 1.7 145 2.0 Cloverleaf 156 V6 2.5 S2 Triumph Sprint ST 1050: It's blue, see. www.cuore-sportivo.co.uk |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dual-Mode Performance Exhaust v. Cat-Back Exhaust | SKW | Corvette | 0 | October 22nd 07 12:34 AM |
How to fix this exhaust... | Dean | Technology | 12 | April 28th 07 12:17 AM |
E30 Exhaust | MarkS | BMW | 7 | January 11th 06 01:49 PM |
Exhaust help | Alex Rodriguez | Honda | 11 | July 19th 05 10:10 PM |
best exhaust for 147 2.0 | Ivan | Alfa Romeo | 0 | July 4th 05 10:42 PM |