A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » BMW
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

e39 cluster problemsssss!



 
 
Thread Tools Display Modes
  #1  
Old October 29th 08, 04:15 AM posted to alt.autos.bmw
[email protected]
external usenet poster
 
Posts: 34
Default e39 cluster problemsssss!

no - gas reading,
no - speed reading,
no - trip miles reset,
no - check control reading,
no - fuel consumption reading,
and I realize the window, sunroof and windshield wipers only work
after about ten minutes of the car running.
If I turn on the wipers they are delayed for about 3 to 5 minutes
before they would start working. The wipers dont return to the home
position when shut off but stays in the middle of the windshield
instead. I have the bentley repair manual and did as much reading as
possible on the topics but still is at a loss... My thought is the
check control module because of the lack of reading when I press the
signal handle tip or try to press the reset button on the cluster.

CAN I GET SOME INPUT ON THIS MAJOR HEADACHE!
Ads
  #2  
Old October 29th 08, 02:19 PM posted to alt.autos.bmw
Scott Dorsey
external usenet poster
 
Posts: 3,914
Default e39 cluster problemsssss!

In article >,
> wrote:
>no - gas reading,
>no - speed reading,
>no - trip miles reset,
>no - check control reading,
>no - fuel consumption reading,
>and I realize the window, sunroof and windshield wipers only work
>after about ten minutes of the car running.
> If I turn on the wipers they are delayed for about 3 to 5 minutes
>before they would start working. The wipers dont return to the home
>position when shut off but stays in the middle of the windshield
>instead. I have the bentley repair manual and did as much reading as
>possible on the topics but still is at a loss... My thought is the
>check control module because of the lack of reading when I press the
>signal handle tip or try to press the reset button on the cluster.
>
>CAN I GET SOME INPUT ON THIS MAJOR HEADACHE!


Have you checked all the fuses yet?

I think you have several unrelated problems here, but all the instrument
cluster problems are related and may have to do with the cluster not getting
power.

The Haynes manual is not useful because the electrical diagrams in it are
rough at best. Get the real electrical service manual which lists everything.

I don't recall if the E39 has any hidden fusible links, but the manual will
show them if they exist.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."
  #3  
Old October 29th 08, 02:20 PM posted to alt.autos.bmw
[email protected]
external usenet poster
 
Posts: 34
Default e39 cluster problemsssss!

On Oct 29, 12:15*am, wrote:
> no - gas reading,
> no - speed reading,
> no - trip miles reset,
> no - check control reading,
> no - fuel consumption reading,
> and I realize the window, sunroof and windshield wipers only work
> after about ten minutes of the car running.
> *If I turn on the wipers they are delayed for about 3 to 5 minutes
> before they would start working. *The wipers dont return to the home
> position when shut off but stays in the middle of the windshield
> instead. *I have the bentley repair manual and did as much reading as
> possible on the topics but still is at a loss... *My thought is the
> check control module because of the lack of reading when I press the
> signal handle tip or try to press the reset button on the cluster.
>
> CAN I GET SOME INPUT ON THIS MAJOR HEADACHE!

THE ABOVE VEHICLE IS A 1998 BMW 528I
  #4  
Old October 29th 08, 04:08 PM posted to alt.autos.bmw
R. Mark Clayton
external usenet poster
 
Posts: 778
Default e39 cluster problemsssss!


> wrote in message
...
> no - gas reading,
> no - speed reading,
> no - trip miles reset,
> no - check control reading,
> no - fuel consumption reading,
> and I realize the window, sunroof and windshield wipers only work
> after about ten minutes of the car running.
> If I turn on the wipers they are delayed for about 3 to 5 minutes
> before they would start working. The wipers dont return to the home
> position when shut off but stays in the middle of the windshield
> instead. I have the bentley repair manual and did as much reading as
> possible on the topics but still is at a loss... My thought is the
> check control module because of the lack of reading when I press the
> signal handle tip or try to press the reset button on the cluster.
>
> CAN I GET SOME INPUT ON THIS MAJOR HEADACHE!


Check battery volts.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
cluster 04bmw745li BMW 0 March 23rd 07 11:22 PM
92 Cab Cluster Q's DruG[_1_] VW water cooled 2 August 31st 06 01:19 AM
Converted 65 instrument cluster to 66 5 gauge cluster but have wiring problem! THE23MAN Ford Mustang 5 February 11th 06 06:00 PM
C4 LCD Cluster Michael Corvette 2 January 17th 06 12:53 AM
Cluster resetting Coenraad Audi 0 June 17th 04 09:19 AM


All times are GMT +1. The time now is 07:03 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.