**HELP** 91 DOHC Starts then Dies/Stops Immediately

Blah Blah > wrote in message >...
> In article >,
> says...
> >
> > 7/17/04 1530hrs - PAUL REPLIES: Bought the fuel pressure tester.
> > Pressure is at 42 psi when pump whirrs. Little to no leak down/decay.
> > With engine cranking, psi is 36. So, this does not appear to be the
> > problem. Still no codes. WHat are the odds it is the knock-sensor ??
> > Btw, checked the wirinig for the oil pressure sensor, and it FEEDS
> > nothing except the gauges. The oil pressure on saturns appear to be
> > only for "show" warnings! They feed no computer!
> >
> > Thx for your help.
> >
> >
>
> So the priming shots not even getting anything to fire? Not even
> starting fluid? I forget, did you say you checked for spark or not? If
> you are not getting spark that should be the next big clue.
================================================== ==================

PAUL REPLIES 7/18/04 1000_EDT: The car starts and runs for 1-2
seconds, I am now getting Tranny Code26. Could this be the reason why
the engines dies 1-2 seconds after start ?

In article >,
says...
> Blah Blah > wrote in message >...
> > In article >,
> > says...
> > >
> > > 7/17/04 1530hrs - PAUL REPLIES: Bought the fuel pressure tester.
> > > Pressure is at 42 psi when pump whirrs. Little to no leak down/decay.
> > > With engine cranking, psi is 36. So, this does not appear to be the
> > > problem. Still no codes. WHat are the odds it is the knock-sensor ??
> > > Btw, checked the wirinig for the oil pressure sensor, and it FEEDS
> > > nothing except the gauges. The oil pressure on saturns appear to be
> > > only for "show" warnings! They feed no computer!
> > >
> > > Thx for your help.
> > >
> > >
> >
> > So the priming shots not even getting anything to fire? Not even
> > starting fluid? I forget, did you say you checked for spark or not? If
> > you are not getting spark that should be the next big clue.
> ================================================== ==================
>
> PAUL REPLIES 7/18/04 1000_EDT: The car starts and runs for 1-2
> seconds, I am now getting Tranny Code26. Could this be the reason why
> the engines dies 1-2 seconds after start ?
>

Yes! Refer to the current running post "**HELP** CODE 26 Transmission
Code - Car Starts then Dies" which it looks like you did.