A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Honda
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

F20A 's resistors*' location ( below bonnet, too hot ) is very wrong.



 
 
Thread Tools Display Modes
  #1  
Old January 26th 21, 05:01 PM posted to rec.autos.makers.honda
TE Cheah[_2_]
external usenet poster
 
Posts: 11
Default F20A 's resistors*' location ( below bonnet, too hot ) is very wrong.

* own heat when input voltage is 13.5 v is already 13.5²/ 9.2 ( 7 + 2.2 ohm ) = 19.8 watt ( assuming 4 injectors in total receive current all the time ), hit by hot air from 2 radiators, so * are hot : *'s heat flow toward injectors, so injectors are too hot for nozzles to be clean.
In 2-10 I used a 3½ amp buck convertor, 1 diode, 5 capacitors ( 0.15 F ) & 1 inductor ( 94 mH ) to feed 4.5 v to injectors : wax clogging nozzles came loose 1 by 1, each time I could feel a small ↑ in torque.
This mth I put * ( with 5 extn wires ) in the space under wiper arm, tape a aluminium dish onto *'s ceramic, file & flatten *'s hsink fins by ½ mm, rub silicone on fins, fit a big 2ndary hsink, put a polystyrene tray underneath, * & wires then much cooler. Idle rpm ↑300, torque ↑15%, coolant's heat ↓10%.
Ads
  #2  
Old June 3rd 21, 05:01 PM posted to rec.autos.makers.honda
TE Cheah[_2_]
external usenet poster
 
Posts: 11
Default F20A 's resistors*' location ( below bonnet, too hot ) is very wrong.

On Tuesday, January 26, 2021 at 8:01:37 AM UTC-8, TE Cheah wrote:
> * own heat when input voltage is 13.5 v is already 13.5²/ 9.2 ( 7 + 2.2 ohm ) = 19.8 watt ( assuming 4 injectors in total receive current all the time ), hit by hot air from 2 radiators, so * are hot : *'s heat flow toward injectors, so injectors are too hot for nozzles to be clean.
> In 2-10 I used a 3½ amp buck convertor, 1 diode, 5 capacitors ( 0.15 F ) & 1 inductor ( 94 mH ) to feed 4.5 v to injectors : wax clogging nozzles came loose 1 by 1, each time I could feel a small ↑ in torque.
> This mth I put * ( with 5 extn wires ) in the space under wiper arm, tape a aluminium dish onto *'s ceramic, file & flatten *'s hsink fins by ½ mm, rub silicone on fins, fit a big 2ndary hsink, put a polystyrene tray underneath, * & wires then much cooler. Idle rpm ↑300, torque ↑15%, coolant's heat ↓10%.

Correction : heat is just 19.8 w x 7/9.2 = 15.07 w. I fitted a W shape hsink ( floppy disk cover ) onto end of *' hsink, 2 polystyrene sheets to shield * : torque ↑ another 5% !
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Radio automatic turnoff: nothing can go wrong go wrong go wrong Ad absurdum per aspera Technology 12 February 19th 08 05:58 AM
Gas Tank Fill Location All Wrong Jeff[_3_] Chrysler 1 November 18th 07 09:58 PM
Gas Tank Fill Location All Wrong Mike Marlow[_1_] Chrysler 0 November 18th 07 02:29 PM
Gas Tank Fill Location All Wrong Paul Johnson[_2_] Chrysler 1 November 18th 07 03:01 AM


All times are GMT +1. The time now is 01:48 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2004-2021 AutoBanter.
The comments are property of their posters.