Ignition Switch
"Dad" > wrote in message
.. .
> > wrote in message
> ps.com...
>>I have a 76 that needs the ignition switch changed. I have
>>the wheel
>> off, but can't figure out how to get the next piece off
>> to get access
>> to the key clinder and switch. It looks like a flat
>> plastic cover.
>> Thanks for your help
>> Mike
>>
> Put your key in, turn it to accessory, push a small drill
> bit into the hole in the face of the switch and depress
> the cylinder's lock while turning the cylinder past
> accessory and pull it out. Insert new lock with the new
> key in it turned to accessory and turn it to start, done.
>
> Easy if you still have a working key and you have the
> switch that has the hole that is not covered with a
> plastic shroud, otherwise all bets are off.
>
> --
> Dad
> 05 C6 Silver/Red 6spd Z51
> 72 Shark Black/Black/4spd
> 64 Red/red/white top/4spd
76 has a retainer type ign in the column.
Its not in the dash...
--
"Key"
=====
|