Thread: Ignition Switch
View Single Post
  #2  
Old August 6th 07, 03:45 PM posted to alt.autos.corvette
Dad[_1_]
external usenet poster
 
Posts: 1,100
Default Ignition Switch

> wrote in message
ps.com...
>I have a 76 that needs the ignition switch changed. I have the wheel
> off, but can't figure out how to get the next piece off to get
> access
> to the key clinder and switch. It looks like a flat plastic cover.
> Thanks for your help
> Mike
>

Put your key in, turn it to accessory, push a small drill bit into the
hole in the face of the switch and depress the cylinder's lock while
turning the cylinder past accessory and pull it out. Insert new lock
with the new key in it turned to accessory and turn it to start, done.

Easy if you still have a working key and you have the switch that has
the hole that is not covered with a plastic shroud, otherwise all bets
are off.

--
Dad
05 C6 Silver/Red 6spd Z51
72 Shark Black/Black/4spd
64 Red/red/white top/4spd

Ads