In article >,
"BDragon" > wrote:
> I forgot to adjust the emergency brake. Now I'm trying to find out if
> that can be done without removing the rotors again.
Absolutely. There's a hole in the hub of the rotor between one pair of
studs through which you can see the star-wheel - that is as long as the
rotor was put back on the axle correctly so the holes line up. A
screwdriver is used to lever the cogs on the star-wheel to
tighten/loosen.
To resogngb: Back to the rotor rivets - you don't have to replace them
when everything goes back together. The wheel lug nuts, of course, will
hold the rotor securely to the hub.
Here's waving to ya - \||||
Owen
___
'67BB & '72BB
___
"To know the world intimately is the beginning of caring."
-- Ann Hayman Zwinger
|