"raam" > wrote in message
oups.com...
> Hi, I am trying to find out runout of a front wheel .But the wheel is
> not straight(The disc).The disc isbent here and there.How to findout
> run out of the wheel.
> Raam
>

Normally you would use a dial indicator. But you could use a rule if the
runout is a lot. However, if you or your alignment shop uses proper wheel
adapters that are adjustable for runout, then you don't need to worry about
the wheel runout affecting the alignment. If you have any runout AT ALL,
you MUST use these adjustable wheel adapters.

-Tony- www.hhservice.com