View Single Post
  #3  
Old April 25th 12, 02:01 PM posted to rec.autos.makers.honda
jim beam[_4_]
external usenet poster
 
Posts: 3,204
Default 96 civic auto trans problem

On 04/25/2012 12:02 AM, Gary wrote:
> Hi all
>
> Im hoping someone else has had this problem and lead me in the right
> direction.i have a 96 civc automatic
> What happens is the thing will go into all gears and run and shift good for
> about 5 minutes then it just like its in neutral.until you turn off the car
> and wait for 30 -45 seconds ,restart car and it will go in gear again for a
> few minutes .then repeat it all
> over again.
>
> I have rebuilt the a4ra trans, put in new clutches and steels and all
> seals ,and put in a re-manufactured torque convertor ,cleaned all the valve
> bodys untill the valves would drop on thier own without getting hung up
> ,replaced a cpc broken spring .checked all solenoids.
>
> I have pulled it out and disassembled for a 2nd time now.
> What happens is the thing will go into all gears and run and shift good for
> about 5 minutes then it just like its in neutral.until you turn off the car
> and wait for 30 -45 seconds ,restart car and it will go in gear again for a
> few minutes .
>
> I hooked up a gauge to the line pressure port its 125-130 and steady until
> the few minutes then it drops to between 20-40 lbs ,you can shut the thing
> off for 30-45 seconds and restart and the pressure will return to normal and
> go in gears again for another few minutes do you think it is a sticky valve
> ? ,i read the pump gears with a feeler gauge and they are within specs ,
> thanks huge in advance.
>
>


and learn to cross post!


--
nomina rutrum rutrum
Ads