ABS and Anti Sked Warnings
In article >,
aRKay > wrote:
> In article >,
> FBNE > wrote:
>
> > On 8/24/2011 12:37 PM, aRKay wrote:
> > > While doing nothing special the ABS and Anti Sked warnings came on the
> > > DIC in my 2001 C5 Coupe.
> > >
> > > I tried to clear then using the RESET and that did not work. I took it
> > > to the dealer and they hooked up the Tech II tool (or whatever it is
> > > called) and it the LF Door code came up saying the left front wheel
> > > sensor was open. I ask them to just clear the codes. They did but as
> > > soon as start the vehicle the two warnings showed up again. The
> > > Service Writer said this means there really is an issue and I would
> > > have bring it back for someone to troubleshoot the wiring and the
> > > wheel sensor.
> > >
> > > Any one has experience with the LF ABS wheel sensor. I wonder
> > > what's involve and why the service writer indicated it may be an
> > > expensive repair.
> > What code(s) are you getting on the DTC? If you see a 1214, the culprit
> > may be a faulty relay inside the ABS unit. I had mine fail and I used
> > absfixer.com and get it completely resolved for $150. Dealer wanted
> > $1400. Another place to look is the large harness going to the ABS unit
> > and see if the clip-over handle has come loose and you are getting a
> > disconnect there. my two cents.
> > FBNE
>
>
The problem has been fixed. It was the EBCM module and I found a
refurbished one that cleared everything.
|