On 1/8/2012 8:44 AM, Dad wrote:
>
> "Bob I" > wrote in message
> ...
>>
>>
>> On 1/7/2012 10:41 PM, FBNE wrote:
>>> On 1/7/2012 6:13 PM, Dad wrote:
>>>>
>>>> "FBNE" > wrote in message
>>>> ...
>>>> snip
>>>>>>
>>>>>> Try this guy if all else fails, some of the ABS units had problems
>>>>>> that
>>>>>> may need updated. www.ABSFixer.com His ABS upgrade and guarantee can
>>>>>> make your problems go away as long as you own the car.
>>>>
>>>>> Thanks Dad, I am on my second ABS from Brandon now. These started
>>>>> about 3-5 months after I did the install. I will double check the
>>>>> large plug on the ABS and the other connections.
>>>>
>>>> Whoa, you're working with him and can't get it fixed? What does he have
>>>> to say about it?
>>> He is good with the C1214 valve fix, these appear to be an on my end
>>> issue. I believe I have a wiring or connector problem. it trips 8 codes
>>> on start up. Once driving down the road, I can clear the codes and they
>>> go away until the next start. Frustrating at best. I will chase the
>>> grounds on the front end of the car and the big common plug on the abs
>>> module first. I had hoped the codes pointed to a common grounding point.
>>>
>>> I don't have a good service manual. Got a good suggestion?
>>
>> http://www.helminc.com/helm/product2...01Y&itemtype=N
>>
>
> I second that, forget about after market, auto store manuals, go with
> the company prepared manual.
>
> Have you had any battery issues especially a leaker?
Not that I am aware of... I pull the battery and take a look.