Yes you need that pin to tag the plate. I have seen spring packs move
out of place.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06
http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
ufatbastehd wrote:
>
> WHen I did my 2.5 RE lift on my YJ I added shims to the rear. The shims
> had holes in them.
> When you add shims do you need to use longer leaf centering pins so the
> pins go through the shim and into the spring plate?
>
> I going higher soon and want to insure I install the new springs and
> shims correctly.