On Sat, 01 Oct 2005 15:57:04 GMT, "Steve W"
> wrote:

>Hi guys. I hope some of you can help me solve this problem - I have a
>mystery rogue clutch master cylinder on my 87 E28 520i. The design and
>fitting is totally unlike what should be there, at least according to my
>local BMW dealer. The cylinder is FAG Part No S5392A. Now I need to repair
>or replace this cylinder, and I have no idea where or how to get a
>replacement........!
>
>See my note below, which I posted a few days ago.
>
>"I have to change my Clutch MC, and according to both Haynes and my local
>part provider, the one that is in the car is all wrong. It has a 2 hole
>mounting flange set at right angles to the axis of the cylinder and bolts to
>the face of the bulkhead. Whereas Haynes indicates that it should have a
>flange face parallel to the axis of the cylinder and bolt to a plate next to
>the clutch pedal. Did they change the design in the last year of E28?? What
>is going on?"
>
>Steve

If you'd like to email me your registration number, I can run it
though the unipart parts list and see what it spits out.

tank_slappa at hotyellowmail.com

Remove the colour ;-)