Here is a link to the article:
http://www.tegger.com/hondafaq/tsb/crv/x00-901e.pdf

Here is my previous post:

What could this be?


It all started about a week ago. Whenever I turned in one direction
(can't remember if it was right or left) the left rear wheel would
squeek (sounded like it was once per revolution, *squeak* *squeak*
*squeak* faster or slower depending on my speed.


Now, for the last 2 days, the wheel squeaks or groans in any direction.
At low speeds, especially while reversing, it sounds like a major
groan. (like a submarine close to buckleing under metal fatigue from
extreme pressure in the movies) rrrrrrrrrrrrrr
Speeding up, it becomes a screeching or squeaking.


One more thing, not sure if it is related. I had a look at all the
rotors and it seems that in the effected area, there is about a quarter
to a half inch what isn't warn on the outside of the rotor and instead
of the nice shiny metal look, there is some rust. On all my other
rotors, there appears to be clean metal (where the pads contact) right
to the edge of the outside of the rotor.


Any ideas? I'm hoping part of the break pad is screwed up and that's
it. Thanks,


Rob