G.R. Patterson III proclaimed:
>
> "James P. H. Fuller" wrote:
>
>>The wheel
>>is dished in and the lugs are placed in a sort of circular trough
>>within the dish, result being I can't get a nut splitter on the frozen
>>lugnuts.
>
>
> If you're serious about splitting the nuts, this can be done from the end of the nut
> rather than the side by using a cold chisel. Lots of work, though.
Using a good cold chisel aided by a Dremel is pretty good. Slow, but
sometimes just cutting a very thin slice in the nut will allow it to
be removed without the chisel. Best done with a tungsten carbide or
better yet, diamond, bit.
|