CJ-7 Key wont turn all the way
"Jo Baggs" > wrote in message
...
>
> "Jo Baggs" > wrote in message
> ...
> > Ok gang,
> > I need help. I went to start my 86 CJ-7 today. They key turned to the
> > first detent (accessories on), but stops at the engine start detent. It
> > almost feels like the rod inside the steering column is jammed up
somehow.
> > Anyone have instructions on how to install a new key cylinder and/or get
> > at the rod that turns inside the column?
> >
> > Thanks
>
> Ok, I'm at a loss. I tried to check on the rod at the end of the steering
> column (Where the rod goes into the electrical block at lower end of
column)
> First, How do I get the block off (if it even comes off) and what exactly
> am I looking for to see if the rod is lined up properly? The rod does
move
> back and forth when the key is turned counter and clockwise. As you
recall,
> it will not turn all the way forward to the ignition on detent.
>
> Does anyone have a schematic?
>
> Lastly, is it possible to put a switch on the starter solenoid; one for
Acc
> on and another for the Starter. I think that would be much easier than
> taking apart the column. Of course, I need someone to tell me which
> solenoid terminal does what.
>
> Thanks
>
>
|