View Single Post
  #3  
Old March 22nd 18, 06:38 PM posted to rec.autos.makers.jeep+willys
Lee Ayrton[_4_]
external usenet poster
 
Posts: 4
Default 1983 CJ7 Hazard Lights Won’t Stop Flashing

On 3/12/2018 8:18 AM, Jeepers wrote:

> I have a 1983 Jeep CJ 7, and I cant seem to find a switch or toggle to stop
> the hazard lights from blinking. The only way I can get them to stop is by
> pressing on the brake. As soon as I release my foot from the brake peddle,
> they start blinking again. I don’t know how to stop this.
>


The brake locking up the flashers is a feature, not a bug. It allows
traffic behind you to know that you've applied the brakes.

You flashers are controlled by a small button on the steering column,
correct? The switch for that is part of the signal light switch, and is
probably borked. It isn't *too* difficult to replace, but it does
require pulling the steering wheel. The difficult part, as I recall, is
threading the harness down the column tube (but it's been over a decade
since I did that and may be misremembering).

Ads