View Single Post
  #9  
Old August 6th 06, 11:21 PM posted to alt.autos.dodge,alt.autos.dodge.truck,alt.autos.dodge.trucks
beekeep
external usenet poster
 
Posts: 7
Default Where is Tran Control Module, Airbag module (2001 Ram) ????

On Sat, 05 Aug 2006 15:29:23 GMT, MoPar Man > wrote:

>I want to unplug the TCM and the airbag module from the wiring/control
>bus. 2001 RAM, 2WD, short cab, 318 (5.2L) with upgraded interior.
>
>There is a small plastic cover on the tranny hump under the dashboard
>held with 2 screws. I take that off and there's a big connector right
>there attached to something. Is that the airbag controller? If so,
>then where's the tranny controller?
>
>The HVAC cluster also has about 2 or 3 connectors (which I unplugged).
>
>I unplugged 2 connectors on the brake unit (I take it this is the ABS
>controller).
>
>I unplugged the 3 cables going to the PCM.
>
>I unplugged the DRL module.
>
>I STILL GET NO BUS MESSAGE, and CCD message on the overhead console.
>
>Where the hell else is this bus going to ?!?!?!
>
>Does anyone know which pins on the 2 cluster connectors is this bus?
>
>Is it 2 wires, or one?
>
>Does it go to the ODB connector?


Don't ya just hate it when you miss the bus?

beekeep


Ads