Forget this information request, I finally found a way to get the fan out. I
ended up sticking a buttur knife into each side of the mount and I was then
able to lift the shroud streight up out of the mount.
Bernie
Bernie K wrote:
>I have a 1996 Saturn SL2. The fan motor needs to be replace however the
>Chilton Repair manual tells me the remove the mounting bolts on both the
>right and left side of the shroud and lift it out. This model has only a
>mounting bolt on the left side. The right side has some kind of a slide
>mount that looks like you should be able to slide the shroud to the left and
>lift it out, however the lower mount keeps the shroud from moving fall enough
>to clear the mount. Does anyone out there know what the procedure for
>removing this fan from the 1996 SL2? Thanks for the information if you have
>any. Bernie
--
Message posted via
http://www.carkb.com