George wrote:
> Our '99 Cavalier had a rotten rear brake line. So, I cut it back to
> good metal, flared the end, and replaced the pipe with some 3/16" stuff
> I had. I got to the axle end, and it suddenly occurred to me that it's
> probably METRIC. And, on closer inspection, it appears to need a 'DIN
> flare' to mate with the axle hose. So, ...
>
> It looks like I can just use one section of 'metric' tubing, to mate
> with the axle hose, and cut the other end off, and put a regular (SAE)
> flare there, to mate with the 3/16" tubing I've installed.
>
> Yes?
>
> Thanks,
> G

NAPA 813-5512 12" sae to metric 3/16" about $10.00