View Single Post
  #20  
Old February 6th 05, 06:46 AM
ed
external usenet poster
 
Posts: n/a
Default

Rich wrote:
> "Lawrence Glickman" > wrote in message
> ...
>
>>On Sat, 05 Feb 2005 22:58:45 GMT, "Rich" > wrote:
>>
>>
> wrote in message
groups.com...
>>>
>>>>I think that is what I will try now. I just replaced my exaust/convert
>>>>from the O2 sensor back and it did not help.
>>>>
>>>>This is getting expensive
>>>>
>>>
>>>Have you replaced the external fuel filter? First thing to replace and

>
> the
>
>>>cheapest.
>>>
>>>If not that I will suspect the filter or pump in the tank. A lot of

>
> labor
>
>>>there emptying the tank.

>>
>>No labor emptying tank. Use a siphon hose, and then to get the last
>>bits, run the engine until it stalls from no fuel. Depending on how
>>much fuel is in the tank now, just put it into a couple of large-sized
>>gasoline cans.
>>
>>Lg
>>

>
>
> Labor if you have it filled (27 Gallons) <Grin>
>
>

I tell ya, go back over what you've already done.
You may have a bad part in the plenum area. Also, there is a strainer in
the tank with the fuel 'assembly'. Is that replaced? That fuel assembly
is best changed completely out and not piece-mealed.
Ads