View Single Post
  #5  
Old May 23rd 05, 05:52 PM
Shep
external usenet poster
 
Posts: n/a
Default

Lots of problems with dpfe sensor on a lot of Ford products in the 96-99 at
least, range.
"Don Byrer" > wrote in message
...
>I have the same code on my 99 Taurus 3.0 DOHC, 66K miles.
>
> Valve a bit grungy but working. Passages appear to be OK.
>
> Sounds like you are on the right track.
> I believe the Taurus system is similar; I was going to put a tee in
> the vac line to a vac gauge and drive it to see what I get. Sending
> 12V to the solenoid sounds easier quicker, and safer. Then verify
> correct 12V/ground coming in to solenoid.
>
> Let us know what you find.
>
> --Don Byrer
> Don Byrer
> Instrument Pilot Commercial/CFI Student
> Electronics Technician, RADAR/Data/Comm @ CLE
> Amateur Radio KJ5KB
>
> "I have slipped the surly bonds of earth; now if I can just land without
> bending the gear..."




----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
Ads