On 8/25/2013 4:18 AM, AllanW wrote:
> On Sunday, August 25, 2013 5:06:14 PM UTC+12, John wrote:
>> Going to replace the windcreen rubber on the squareback. Don,t have any
>>
>> problems with the process having done quite a few other windows before.
>>
>> Except, for the soft aluminium trim. Anyone know whether I should fit the
>>
>> trim last, after window has been refitted or fit rubber to window,then the
>>
>> trim, and then install window,rubber and trim together?. So darn soft I dont
>>
>> wont to end up with dents all over it. All hints appreciated.
>>
>> Cheers
>>
>> John
>
> I haven't done it, but I understand the trim must be in the rubber before fitting - it won't fit afterwards.
>
> Good luck!

Correct. Rubber around glass first, then trim in the groove in the
rubber, then the whole deal in the car.
Use soapy water for lubrication.