I used one of those flex shaft sockets to get to the one's on my 93, it was
still difficult, but it worked.

"garygolden" > wrote in message
...
> So far I've not been able to even get a wrench on the nuts on the mounting
> studs. I've removed or loosened just about everything short of removing
> the entire dash. I can't believe that you have to do that just to change
> out the power booster.
>
>
>
>
>
> "Clams Canino" > wrote in message
> m...
>> The mounting studs should not turn when you turn the nuts.
>> If they do... you'll need to get at the backs "somehow".
>> Good luck.
>>
>> -W ('68)
>>
>> "garygolden" > wrote in message
>> ...
>>> Anyone out there have any good tips as to how to remove the brake power
>>> boost on an '81? It appears that the 4 mounting studs come through the
>>> firewall from the engine side. Almost impossible to get at short of
>>> removing the dash. Don't want to do that.
>>>
>>> Golden
>>> '64 Coupe
>>> '78 Silver Anniversary
>>> '81 Coupe.
>>>
>>>
>>>
>>>
>>
>>
>
>