When I manual shift to neutral coming to an intersection or stop, my 93
wrangler 4.0 FI engine sometimes stalls out. It seems to have coincided
with my speedometer not working. Would that be a cause?

I disconnected the connector leading to the sensor/gear on the transfer
case and I noticed a three wire connection, so it must be
electronically sensed to the speedoemter. Before I purchase another
sensor is there anything I can ohm out or check for voltages on the
three wire connector? Diagram anyone has?

I also thought about the sensor gear not meshing, so if I disconnect
the sensor/gear from the transfer case with the cable connected, turn
key to ignuand manually torn the gear by hand, should I see an output
at the speedometer if the sensor is working?


waz