Yes - that's the same one I have. That section only covers the V6. The
whole EGR system on the V8 that I have is considerably different.
- Dave


Kevin D wrote:
> Dave, which Haynes manual do you have? I have the1991 thru 2000 model year
> manual. On page 6-26 is a pretty detailed procedure for R&R of the valve.
>
> You only need to remove 2 bolts, a vacuum hose and the pipe retaining nut.
> You might need to tap on the valve to break it loose. Once it's out, remove
> the old gasket material. If the mounting flange is dirty, clean it with some
> fine steel wool.
>
> Use a new gasket (should come with the new valve). Replace the bolts, vac
> hose and pipe, tighten everything up, and you're done.
>
> Good luck,
> Kevin
>
> "Dave Horoschak" > wrote in message
> ...
>
>>Does anyone know where I can find the instructions for replacing the EGR
>>valve in a 96 Explorer V8? None of the typical manuals (Chiltons, Haynes)
>>cover the V8 in enough detail for this to be included.
>>
>>Thanks.
>> - Dave
>
>
>