View Single Post
  #7  
Old November 30th 04, 04:03 PM
Mike Behnke
external usenet poster
 
Posts: n/a
Default

Dan;

Oil pressure switch connector body is light green in color. 1 wire
coming out of it. With the engine off, that wire should be grounded to
the chassis. Lock tab is probably facing away from you.


The crank shaft position sensor connector body is black. Don't know
off-hand what the orange connector is.


Dan Brenner wrote:

> I have read there is a TSB (08-36-99) on this problem that I have been
> experiencing lately. I have purchased the wire terminal/vent p/n
> 05017800AA mentioned in the TSB and I want to install it myself.
> I would like to know the location of the oil pressure switch on the
> 2.7L engine. I have looked under the engine (passenger's side) and I
> see 3 units. From the firewall towards the front of the car they a
> a black one, an orange one and a green one (these are the connectors'
> colors). I suspect the green one is the oil pressure switch but I'm
> not sure. If it is the one, how do I remove the switch connector from
> the switch? Something seems to lock it in place and I can't see the
> typical plastic tabs.
> If anyone has experience with this could you please share it.
> Thanks much,
> Dan

Ads