How much was the dealer wanting for this option ?

<japhar81> wrote in message ...
> Ok, so after a week of research, $500, and some serious migranes, I have
> found the 'almost definitive' answer on getting fogs into the V6.
>
> The parts needed are the Ford OEM grille, fog switch, and fog lights from
> the GT, and the wiring harness being hawked all over ebay (DONT buy the
> grille kit theyre selling).
>
> To make the grille fit in the V6, clip the bottom clips on the GT grille
off
> with some tin snips. The rest of the clips fit, so just clip the grille
in.
> Use some self-tapping screws to secure the bottom, or some C clips if you
> can find them.
>
> The wiring harness hooks up pretty easy, just follow the instructions.
> Instead of wiring the switch the way they want you to, install the OEM
> switch (it just pops in basically), and wire it in by pulling off the
> plastic clips off the harness and the switch. Use some heatshrink and a
> saudering iron to hook up the two wires to the prongs in the switch. It
> doesnt matter which wire goes where.
>
> Pretty simple, takes about an hour, and oh yeah, no need to drill your
> grille!
>
> IF anyone needs more help and/or pics, let me know. Just thought Id share.
>
>