"Big Al" > wrote in message
...
>
> "'Key" > wrote in message
> . ..
>> "Dad" > wrote in message
>> .. .
>> > > wrote in message
>> > ps.com...
>> >>I have a 76 that needs the ignition switch changed. I
>> >>have
>> >>the wheel
>> >> off, but can't figure out how to get the next piece
>> >> off
>> >> to get access
>> >> to the key clinder and switch. It looks like a flat
>> >> plastic cover.
>> >> Thanks for your help
>> >> Mike
>> >>
>> > Put your key in, turn it to accessory, push a small
>> > drill
>> > bit into the hole in the face of the switch and depress
>> > the cylinder's lock while turning the cylinder past
>> > accessory and pull it out. Insert new lock with the new
>> > key in it turned to accessory and turn it to start,
>> > done.
>> >
>> > Easy if you still have a working key and you have the
>> > switch that has the hole that is not covered with a
>> > plastic shroud, otherwise all bets are off.
>> >
>> > --
>> > Dad
>> > 05 C6 Silver/Red 6spd Z51
>> > 72 Shark Black/Black/4spd
>> > 64 Red/red/white top/4spd
>>
>> 76 has a retainer type ign in the column.
>> Its not in the dash...
>>
>> --
>> "Key"
>> =====
>
> Think he's trying to get past the steering wheel lock.
> Wish he would have
> given a tad more information.
>
> Al


yea, the more I think about it, he may have had a telescopic
tilt wheel.
I am not sure what the 76 had..

--
"Key"
=====