Thread: Ignition Switch
View Single Post
  #8  
Old August 8th 07, 03:47 PM posted to alt.autos.corvette
Eugene Blanchard
external usenet poster
 
Posts: 83
Default Ignition Switch

Try WD40 sprayed into the lock. It might work..


>
> It's a basic column no telescopic or tilt. I got the ring off and the
> turn signal switch is hanging out, I took out the 4 bolts holding the
> next piece of the column but it seems to be connected to somehing I
> cannot see. This all started when the key started sticking in the
> start mode and not returning to run. Hopefully I haven't ruined the
> starter. I'll save that for another day. Advice I got from a local guy
> said try to clean up the lock cylinder, maybe the ignition switch
> doesn't need changing. Once I get in there should I change it anyway
> being it's not too expensive of a part according to a parts catalog?
>
> Mike


--
Eugene Blanchard
http://www.cadvision.com/blanchas
Home of the DIY Hot Rod Kustom website
Ads