what's the condenser for on a mechanical voltage regulator?
Just tried my '66 GTO's mechanical voltage regulator on my friend's
'69 Firebird and it started charging his battery again. Even though he had bought a new voltage regulator a month or so ago. (And then an alternator.) His does not have the condenser installed on the voltage regulator like mine does, but there's a terminal for it. I'm wondering if the condenser is necessary, maybe to keep the contacts from burning? I'd heard it was to prevent radio intereference, which we don't care about. I can't find anything in the service manual about it. If it's necessary to prevent contacts burning, maybe his new voltage regulator fried its contacts. |
what's the condenser for on a mechanical voltage regulator?
> wrote in message oups.com... > Just tried my '66 GTO's mechanical voltage regulator on my friend's > '69 Firebird and it started charging his battery again. Even though > he had bought a new voltage regulator a month or so ago. (And then an > alternator.) His does not have the condenser installed on the voltage > regulator like mine does, but there's a terminal for it. > > I'm wondering if the condenser is necessary, maybe to keep the > contacts from burning? I'd heard it was to prevent radio > intereference, which we don't care about. I can't find anything in > the service manual about it. If it's necessary to prevent contacts > burning, maybe his new voltage regulator fried its contacts. > The condensor keeps the points from burning up. When the points break, for a short time, current keeps flowing in the condensor. So, the points don't arc. Then when the contacts close the condensor dumps it's charge across the closed points and is then ready to absorb the current from the next break. Ted |
what's the condenser for on a mechanical voltage regulator?
On Feb 18, 8:02�pm, wrote:
> Just tried my '66 GTO's mechanical voltage regulator on my friend's > '69 Firebird and it started charging his battery again. *Even though > he had bought a new voltage regulator a month or so ago. *(And then an > alternator.) *His does not have the condenser installed on the voltage > regulator like mine does, but there's a terminal for it. > > I'm wondering if the condenser is necessary, maybe to keep the > contacts from burning? *I'd heard it was to prevent radio > intereference, which we don't care about. *I can't find anything in > the service manual about it. *If it's necessary to prevent contacts > burning, maybe his new voltage regulator fried its contacts. I could be wrong, but I always thought they were for radio noise only since most don't have them. The points on the voltage regulator solenoids don't open and close at over 1000 times per minute like the igniton points (only when key is turned on/off), therefore they won't burnt out nearly as quick. Hank |
what's the condenser for on a mechanical voltage regulator?
|
what's the condenser for on a mechanical voltage regulator?
The points 'do' arc out and burn in those regulators or you wouldn't
need new ones.... I was always under the impression you needed the condenser to slow this down. Sometimes if they have arced while closed, you can thump on the regulator to get it going again if I remember right. The bad alternator might have caused this also. Some others you could open and inspect. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) wrote: > Just tried my '66 GTO's mechanical voltage regulator on my friend's > '69 Firebird and it started charging his battery again. Even though > he had bought a new voltage regulator a month or so ago. (And then an > alternator.) His does not have the condenser installed on the voltage > regulator like mine does, but there's a terminal for it. > > I'm wondering if the condenser is necessary, maybe to keep the > contacts from burning? I'd heard it was to prevent radio > intereference, which we don't care about. I can't find anything in > the service manual about it. If it's necessary to prevent contacts > burning, maybe his new voltage regulator fried its contacts. > |
what's the condenser for on a mechanical voltage regulator?
"Mike Romain" > wrote in message g.com... > The points 'do' arc out and burn in those regulators or you wouldn't > need new ones.... I was always under the impression you needed the > condenser to slow this down. You're right, Mike. The condensor is there to stop RFI but it does it by stopping the sparking, which is an interrupted DC. Just like the condensor used to do on points, it provides a low impedance path for high frequency AC or interrupted DC. While an electromechanical regulator might not be a critical to spark damage as ignition points were, the principle is similar. |
what's the condenser for on a mechanical voltage regulator?
On Feb 19, 5:04 am, "Hustlin' Hank" > wrote:
> > I could be wrong, but I always thought they were for radio noise only > since most don't have them. The points on the voltage regulator > solenoids don't open and close at over 1000 times per minute like the > igniton points (only when key is turned on/off), therefore they won't > burnt out nearly as quick. > > Hank Those points DO open and close thousands of times per minute. They are buzzing constantly, making and breaking contact and forming a (more or less) square-wave input to the alternator rotor. The induction of the rotor's coil smooths out the wave somewhat, but also causes sparking at the regulator points and they will ultimately either burn out or weld themselves shut. Filing them doesn't help much; they are silver-faced and once the silver is gone they quickly fail again. There is a resistor across the contact points. You'll find it under the regulator frame, in open air. When the points open, the current takes the path through the resistor, reducing the current flow to the rotor and thus reducing the alternator output voltage. If the voltage gets really high, the regulator's moving contact goes to ground and takes the rotor current to zero. The capacitor will reduce radio noise and contact point erosion, though many regulators will go for years without a capacitor. The rotor's induction isn't all that great and the resistor absorbs much of the peaking created by the rotor coil. After my students wire up the alternator charging systems on the teaching boards, we can see the constant, tiny spark between the points if the room is really dark. Those points are moving constantly. They have to, to keep the voltage exactly where the regulator wants it. The electronic regulator makes much more sense, modulating the current instead of repeatedly interrupting it altogether. I have schematics here of the electromechanical regulator. I can't find a similar one on the 'net. Dan |
what's the condenser for on a mechanical voltage regulator?
On Mon, 19 Feb 2007 12:43:05 -0600, > wrote:
> >"Mike Romain" > wrote in message ng.com... >> The points 'do' arc out and burn in those regulators or you wouldn't >> need new ones.... I was always under the impression you needed the >> condenser to slow this down. > >You're right, Mike. The condensor is there to stop RFI but it does it by >stopping the sparking, which is an interrupted DC. Just like the condensor >used to do on points, it provides a low impedance path for high frequency >AC or interrupted DC. > >While an electromechanical regulator might not be a critical to spark damage >as ignition points were, the principle is similar. > To the OP.. you do NOT need this cap..... It is NOT a functional part of the charging system in any way... It is only a high frequency bypass to ground for radio noise suppression. Its purpose and connection into the circuit in this application does not affect nor control the arcing at the voltage control contacts... Having this cap in the circuit (or not) will not damage the regulator or affect the charging system in any way. The capacitor on the GM Delco voltage regulator is ONLY for RFI suppression.. it is not in the "Field" circuit where the altenator field (rotor) contacts are located. In the days of generator (as opposed to "alternator" charging systems, mis-connecting the RFI capacitor to the field terminal of the generator (an easy mistake to make in the day) would CAUSE a failure of the voltage control contacts in the regulator!! The cap in this particular application was mounted on the generator case, and designed to be connected to the generator "Armature" terminal which was in fact the current output terminal. GM DELCO used to put a big round red cardboard warning tag on the "field" terminal of the generators telling you NOT to connect the capacitor wire to this (field) terminal! In this instance, the capacitor was being used to suppress the RFI from the arcing at the generator brushes which would be heard as a "whine" on an AM radio.. Of course these two connection terminals were located side by side on the generator case, and only a few of us could read the big red tag. So when this mistake was made the voltage regulator failure would occur within a couple hundred miles. <BG> These uses are NOT related to the use of a capacitor in "Point + Condenser ignition system, where the cap serves an entirely different function in the creation of the High Voltage spark and in fact does absorb the arc at the contacts that is created by the collapse of the field in the primary of the ignition coil on the "break" of the contacts. Again, I repeat, this capacitor on the Delco Altenator regulator base is NOT involved in the charging circuit in any way, and only exists to suppress the RFI generated by the arcing at the vr contacts... If you look at the back of the regulator base, you will see that the capacitor terminal is merely an extension of the "B" or Battery terminal lug. The capacitor from there to ground suppresses any HF RFI that might be generated from reaching the rest of the car's electrical system and thence being heard as a "popping" type of static on an AM radio.. Feel free to ask for more technical explanation an any time. School is out fo now .. there will be a quiz later <G> Bob F. |
what's the condenser for on a mechanical voltage regulator?
|
All times are GMT +1. The time now is 03:47 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
AutoBanter.com