2000 jeep grand cherokee laredo
 

it started to vibrate a couple of days ago.everyone i talked to said to
replace the u joints.i also noticed the seal where the drive shaft comes
out of the transfer case was leaking.to make it a little shorter i changed
the u joints and was going to change the seal but was sold the wrong part
so i put the drive shaft back in without replacing the seal.was going to
drive it to get parts now it is way worse than before and vibrates so bad
that you can't go over 35.what else do i need to replace?getting
frustrated with it

2000 jeep grand cherokee laredo
 

What about the other 5 u-joints? You say you did the back 2 only.

You really need someone who has a half a clue to have a look at it, it
gets expensive throwing parts at it.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

lbg wrote:
>
> it started to vibrate a couple of days ago.everyone i talked to said to
> replace the u joints.i also noticed the seal where the drive shaft comes
> out of the transfer case was leaking.to make it a little shorter i changed
> the u joints and was going to change the seal but was sold the wrong part
> so i put the drive shaft back in without replacing the seal.was going to
> drive it to get parts now it is way worse than before and vibrates so bad
> that you can't go over 35.what else do i need to replace?getting
> frustrated with it