Wire cut need to change the whole wheel on a C5
Hi to all,
The wire that goes in the whell has been cut. This wire enables the ABS, stability control and antiskid to run. The garage owner told me that I have to change the whole wheel : hub with everything around it.....it will cost me about 800 euros for that. Do anyone would recommand me a another solution. Thanks for any help. Jacques Moreau. |
How did the wire get cut? Where is the cut? On the hub side or on
the wiring harness side? Why can't the wire be spliced? Or just replace the harness? Check out www.c5forum.com or www.corvettemechanic.com for more help. On Tue, 10 Aug 2004 07:49:38 +0200, "Fred" > wrote: >Hi to all, > >The wire that goes in the whell has been cut. This wire enables the ABS, >stability control and antiskid to run. >The garage owner told me that I have to change the whole wheel : hub with >everything around it.....it will cost me >about 800 euros for that. >Do anyone would recommand me a another solution. > >Thanks for any help. > >Jacques Moreau. > |
All times are GMT +1. The time now is 06:19 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
AutoBanter.com