95: need cps and tps connectors
 

hi,

swmbo's 95 with a jr/sc has been stumbling at steady throttle,
especially when cold, so i decided to solder the cam pos sensor and
throttle pos sensor wires where the blower related wires had been 3m'd
or crimped t ensure that was not the issue. well one lead came out
of the cps and the tps doesnt look much better.

so i either need the two connectors or i need to repair them...i am
not sure repair is viable but i am willing if there are instructions
some where. if not repair, anyone have know where to get these
connectors? bone yard only? im not sure they will do that but i will
ask i need be.

thanks,'
peter

95: need cps and tps connectors
 

On 4/22/2011 10:58 AM, peter wrote:
> hi,
>
> swmbo's 95 with a jr/sc has been stumbling at steady throttle,
> especially when cold, so i decided to solder the cam pos sensor and
> throttle pos sensor wires where the blower related wires had been 3m'd
> or crimped t ensure that was not the issue. well one lead came out
> of the cps and the tps doesnt look much better.
>
> so i either need the two connectors or i need to repair them...i am
> not sure repair is viable but i am willing if there are instructions
> some where. if not repair, anyone have know where to get these
> connectors? bone yard only? im not sure they will do that but i will
> ask i need be.
>
> thanks,'
> peter
A boneyard may be the best choice. But, remember that Flyin Miata does
LS V8 conversions, and may have pulls from conversions. Add is in miata.net

95: need cps and tps connectors
 

> A boneyard may be the best choice. But, remember that Flyin Miata does
> LS V8 conversions, and may have pulls from conversions. Add is in
> miata.net

Good thought, they call it the 'salvage' area and they sell off stuff from
their tear downs, pretty reasonably.

cd