***PING*** DAD*** a little help please!
 

I have a 90 c4 6 speed. Im at my place in Florida for the winter and
all my mauals are back in Maryland. Yesterday my "change oil light"
came on and for the life of me I cant remember how to reset it. Could
you possible help? I would greatly appreciate it.
Thanks
Ron

***PING*** DAD*** a little help please!
 

> wrote in message
...
>
> I have a 90 c4 6 speed. Im at my place in Florida for the winter and
> all my mauals are back in Maryland. Yesterday my "change oil light"
> came on and for the life of me I cant remember how to reset it.
> Could
> you possible help? I would greatly appreciate it.
> Thanks
> Ron
>
Not sure about the '90 but my '92 was turn on the ignition but do not
start the engine.

Press and release the eng/met button twice within five seconds.

Within the next five seconds hold down the gages button (may be the
range button on yours), the change oil light should flash.

Continue to hold down the button until the change oil light quits
flashing, reset is complete.

If this fails then switch off the key and then back on to do it again.

***PING*** DAD*** a little help please!
 

wrote:
> I have a 90 c4 6 speed. Im at my place in Florida for the winter and
> all my mauals are back in Maryland. Yesterday my "change oil light"
> came on and for the life of me I cant remember how to reset it. Could
> you possible help? I would greatly appreciate it.
> Thanks
> Ron

http://tinyurl.com/6cvud7t

***PING*** DAD*** a little help please! ----THANKS-----
 

It worked exactly as you said.
Thanks
Ron

On Wed, 19 Jan 2011 13:56:24 -0500, "Dad" > wrote:

>
> wrote in message
.. .
>>
>> I have a 90 c4 6 speed. Im at my place in Florida for the winter and
>> all my mauals are back in Maryland. Yesterday my "change oil light"
>> came on and for the life of me I cant remember how to reset it.
>> Could
>> you possible help? I would greatly appreciate it.
>> Thanks
>> Ron
>>
>Not sure about the '90 but my '92 was turn on the ignition but do not
>start the engine.
>
>Press and release the eng/met button twice within five seconds.
>
>Within the next five seconds hold down the gages button (may be the
>range button on yours), the change oil light should flash.
>
>Continue to hold down the button until the change oil light quits
>flashing, reset is complete.
>
>If this fails then switch off the key and then back on to do it again.
>

***PING*** DAD*** a little help please! ----THANKS-----
 

Range or gage button?

> wrote in message
...
> It worked exactly as you said.
> Thanks
> Ron
>
> On Wed, 19 Jan 2011 13:56:24 -0500, "Dad" >
> wrote:
>
>>
> wrote in message
. ..
>>>
>>> I have a 90 c4 6 speed. Im at my place in Florida for the winter
>>> and
>>> all my mauals are back in Maryland. Yesterday my "change oil
>>> light"
>>> came on and for the life of me I cant remember how to reset it.
>>> Could
>>> you possible help? I would greatly appreciate it.
>>> Thanks
>>> Ron
>>>
>>Not sure about the '90 but my '92 was turn on the ignition but do
>>not
>>start the engine.
>>
>>Press and release the eng/met button twice within five seconds.
>>
>>Within the next five seconds hold down the gages button (may be the
>>range button on yours), the change oil light should flash.
>>
>>Continue to hold down the button until the change oil light quits
>>flashing, reset is complete.
>>
>>If this fails then switch off the key and then back on to do it
>>again.
>>

***PING*** DAD*** a little help please! ----THANKS-----
 

Mine said range.

On Thu, 20 Jan 2011 11:41:40 -0500, "Dad" > wrote:

>Range or gage button?
>
> wrote in message
.. .
>> It worked exactly as you said.
>> Thanks
>> Ron
>>
>> On Wed, 19 Jan 2011 13:56:24 -0500, "Dad" >
>> wrote:
>>
>>>
> wrote in message
...
>>>>
>>>> I have a 90 c4 6 speed. Im at my place in Florida for the winter
>>>> and
>>>> all my mauals are back in Maryland. Yesterday my "change oil
>>>> light"
>>>> came on and for the life of me I cant remember how to reset it.
>>>> Could
>>>> you possible help? I would greatly appreciate it.
>>>> Thanks
>>>> Ron
>>>>
>>>Not sure about the '90 but my '92 was turn on the ignition but do
>>>not
>>>start the engine.
>>>
>>>Press and release the eng/met button twice within five seconds.
>>>
>>>Within the next five seconds hold down the gages button (may be the
>>>range button on yours), the change oil light should flash.
>>>
>>>Continue to hold down the button until the change oil light quits
>>>flashing, reset is complete.
>>>
>>>If this fails then switch off the key and then back on to do it
>>>again.
>>>