AutoBanter

AutoBanter (http://www.autobanter.com/index.php)
-   Technology (http://www.autobanter.com/forumdisplay.php?f=8)
-   -   1992 OLDS CEIRA,starts cool,gets warm,cuts off,won't start (http://www.autobanter.com/showthread.php?t=37443)

fixer July 5th 05 11:37 PM

1992 OLDS CEIRA,starts cool,gets warm,cuts off,won't start
 
please help,replaced all 3 coils,starts cool,runs,gets warm,cuts off,let it
cool,starts right up.All answers appreciated.Will check for spark today to
sparkplugs after it cuts off.


« Paul » July 6th 05 01:21 AM

fixer wrote:
>
> please help,replaced all 3 coils,starts cool,runs,gets warm,cuts off,let it
> cool,starts right up.All answers appreciated.Will check for spark today to
> sparkplugs after it cuts off.


Sounds like the crank sensor going bad... or ign module.

[email protected] July 6th 05 05:14 AM

bad relay or senser


fixer July 7th 05 02:00 AM

today,by the way this is a 3.3 engine,it's losing fire to spark-plugs,when
it cuts off,no warning codes,i'm leaning toward the camshaft sensor.Does
anyone have any tips in changing this sensor,besides a lot of praying?What
tool do u use to make sure u have it the correct distance from the
crankshaft pulley?Thanks for all your helpful replies.


« Paul » July 7th 05 04:44 AM

fixer wrote:
>
> today,by the way this is a 3.3 engine,it's losing fire to spark-plugs,when
> it cuts off,no warning codes,i'm leaning toward the camshaft sensor.Does
> anyone have any tips in changing this sensor,besides a lot of praying?What
> tool do u use to make sure u have it the correct distance from the
> crankshaft pulley?Thanks for all your helpful replies.


You probably meant crankshaft sensor?
The hardest part is removing the dampner.
You can try wedging in a breaker bar on the nut and tapping the
starter or use a quality impact running 100+ psi.
I use the impact method.
Here is a link to a similar sensor install:
http://www.vortexbuicks-etc.com/cranksensor.htm

fixer July 9th 05 04:32 PM

thx.Paul,you're correct,crankshaft sensor,u been so helpful,thank you so
much.


fixer July 9th 05 04:33 PM

thx. 4 your help.



All times are GMT +1. The time now is 12:54 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
AutoBanter.com