auto cop with gps tracking system
hi,
i am having one vehicle tracking system which i want to install in my car which is having center lock system (operation with remote). now the tracking unit i have is having three wires comming out ("COM", "NC" , "NO"). if "com" connected to (+12dc) the "NC" give the +12v output while "no" act as grd. when the unit is given command "no" gives +12v and "nc" grd. i want this to connect to door lock which have 2 wires to the motor one +12v one (grd), when remote triggerd the polarity changes and the lock opens and close. how can i connect these two,? will it be any short circuit if the commands entered from both (remote and tracking unit).? |
auto cop with gps tracking system
There are many companies interested in our track consumer behavior. Recently it was revealed that Apple and Android track the GPS locations of users in some versions of the operating system. There are vehicles which are installed in gps car tracking to always be possible to know what their position, not only in the case of auto theft. There are special uses for GPS merchandise tracking systems http://www.starcomsystems.com/ and for applications. Monitoring the location of all devices
|
All times are GMT +1. The time now is 04:24 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
AutoBanter.com