rabbit ignition switch to toggle switch
 

Hi,
The wiring between my ignition switch and starter solenoid is bad. Oh,
BTW, it is an 82 rabbit 1.7 CIS gasser pickup. I want to replace the
ignition switch with a toggle and push botton switch like an old
tractor. My big question is how many poles will I need in the toggle
switch. I know that the ignition turns everything on and off, but are
there separate circuits that run through the switch that would require
more than one pole? Thanks.

rabbit ignition switch to toggle switch
 

Sure would be a lot cheaper just to replace the $20 ignition switch?


> wrote in message
oups.com...
> Hi,
> The wiring between my ignition switch and starter solenoid is bad. Oh,
> BTW, it is an 82 rabbit 1.7 CIS gasser pickup. I want to replace the
> ignition switch with a toggle and push botton switch like an old
> tractor. My big question is how many poles will I need in the toggle
> switch. I know that the ignition turns everything on and off, but are
> there separate circuits that run through the switch that would require
> more than one pole? Thanks.
>

rabbit ignition switch to toggle switch
 

Why do it that way? Get a Bentley manual and do it right.