1992 OLDS CEIRA,starts cool,gets warm,cuts off,won't start
please help,replaced all 3 coils,starts cool,runs,gets warm,cuts off,let it
cool,starts right up.All answers appreciated.Will check for spark today to sparkplugs after it cuts off. |
fixer wrote:
> > please help,replaced all 3 coils,starts cool,runs,gets warm,cuts off,let it > cool,starts right up.All answers appreciated.Will check for spark today to > sparkplugs after it cuts off. Sounds like the crank sensor going bad... or ign module. |
bad relay or senser
|
today,by the way this is a 3.3 engine,it's losing fire to spark-plugs,when
it cuts off,no warning codes,i'm leaning toward the camshaft sensor.Does anyone have any tips in changing this sensor,besides a lot of praying?What tool do u use to make sure u have it the correct distance from the crankshaft pulley?Thanks for all your helpful replies. |
fixer wrote:
> > today,by the way this is a 3.3 engine,it's losing fire to spark-plugs,when > it cuts off,no warning codes,i'm leaning toward the camshaft sensor.Does > anyone have any tips in changing this sensor,besides a lot of praying?What > tool do u use to make sure u have it the correct distance from the > crankshaft pulley?Thanks for all your helpful replies. You probably meant crankshaft sensor? The hardest part is removing the dampner. You can try wedging in a breaker bar on the nut and tapping the starter or use a quality impact running 100+ psi. I use the impact method. Here is a link to a similar sensor install: http://www.vortexbuicks-etc.com/cranksensor.htm |
thx.Paul,you're correct,crankshaft sensor,u been so helpful,thank you so
much. |
thx. 4 your help.
|
All times are GMT +1. The time now is 04:28 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
AutoBanter.com