I'm having problems with my dash board lights and am in of the diagram for trouble shooting. Can anyone help with this request?

All, I went out and bought the heater blower (http://www.off-road.com/jeep/tech/body/heater.html), and have run into a problem or two. First off, both AutoZone and O'Reilley's only offer one heater blower for that year, so there wasn't a choice between the cheaper one and the more expensive one. ...

http://www.installdr.com/QuickWiring.html adapters: http://www.pozitiveconnections.com/hrn.htm God Bless America, ßill O|||||||O http://www.billhughes.com/ Brian wrote: > > I need the designations for the radio wiring harness. I have the > optional overhead bar in back...

Had my '99 JGC Laredo to the dealership a couple weeks ago for a radiator fan relay to be replaced and had a few other things done that I didn't feel like messing with. One was to replace the spark plugs (I had some Bosch Platinum's in it). Don't know what they put in it but now I have a hard...

http://www.bigcountryoff-road.com/Past%20Events/adg.wmv

Well, a little over a week ago I posted I was getting flashed every so often with my new EURO HID lamps. I was at a party in the big city (Waldorf) came out and poof no lamps, yes, no friggin lamps. Some SOB stole my HIDs so much for the Holiday Cheer. I got home with my fog lamps and they left...

any wind tunnel tests for a Wrangler? Just a sheer curiosity...want to test the toaster thing! Don't want to build a wind tunnel for my TJ, one in the works for the toaster (love after Halloween fog machine specials.) Bill, Bill, you of all people would have it. -- Disclaimer: A large chunk of...

So, my wife is pregnant. Now, I'm facing the terrible situation of possibly having to let my 97 TJ Sahara be put up for sale. My wife hates driving the TJ and I'm not sure I feel comfortable having the baby in there either. So, what to do? Any advice from people who've made it through with...

My daughter cracked the front pass turn signal lens on her '94 GC. I have a new lens assy and see that it is install w/ a screw on top and screw on the bottom. I've located the screw on top but access to the bottom of the assy is a real trick. Any insight as to removing the old turn signal lens?...

i was wondering if i made my own "Pucks" on my lathe with 6061alum, what grade bolts would be needed, , what diam would the Pucks have to be? and also other than the raidiator, what should i be looking out for? ive got alot of aluminum scraps kicking around and figurd id make my own, ,

Folks, My Jeep started to give off a strong smell of gasoline, coming from the left (driver) side -- middle section. The smell comes from somewhere outside the cabin, in front of the refueling opening (not from the opening itself,) possibly from the upper area of the fuel tank. The smell is...

Crankshaft Fluiddamper serpentine pulley for 2.5? 4.0 and perhaps 258. I bought this because I was making a stroker engine. I originally planned om making a high rpm 12 CW crank engine. that fell through and i used a 4cw crank and a lower RPM cam. This crank damper is made to fit a 4.0 but...

I have an 89 Cherokee Ltd which has numerous electrical problems which may or may not be related: These work sometimes and sometimes they don't - Driver side door light, cargo light, power door locks. These don't work - Clock light, radio display light, power antenna. Now, the tail lights and...

http://www.bigcountryoff-road.com/Past%20Events/adg.wmv

Just added this MSD ignition box from my jeep. I ended up with two. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7940029745&ssPageName=STRK:MESE:IT I'll be adding more things soon, like stock leaf springs, shock mounts, stock antenna, guages, and...

I bought a new 2004 Wrangler Unlimited this evening. I would be interested in comments from anyone who has towed a travel trailer with their Unlimited. In particular, what types of travel trailers would fit within the 25 square-foot front surface area limitation. Probably a pop-up, but without...

Some of you may remember that I was planning on putting a 2" coil spacer lift on my 89 Cherokee. After exhaustive research, I have decided this is probably not the best option for me. I'm looking at the 3.5" Rubicon Express Super Ride kit w/rear springs. How good is the ride of this kit compared...

Well, I saw my first at the dealer yesterday. It was patriot blue with khaki interior. :-( Dealer told me that with my trade, it could be mine for $21k. If i'm spending that much, I'd rather order one in the color of my choice. Matt told me that I could order one with a >black< top not that...

Hi all, Does anyone know where the wiring diagram can be had for a 2003 Jeep Liberty on-line? Thanks.

Just wondering what turns on and off the 4wd part-time and full-time lights on a 93 XJ (4.0, atw4 tranny)? I noticed last night that the indicator lights don't turn on. T-case still shifts and engages into both 4wd drive settings, this morning a few local roads were just slippery enough to...