I have a 66 coupe with a C6 in it from the previous owner. He had a cable linkage to a B&M Unimatic shifter and I now want to swap it out for a stock shifter. Problem is finding a C6 linkage arm. Can anyone help me out here please. I'm unsure whether a C4 linkage arm will fit either in shape or...

Hi! Recently bought a -77 Mustang II Mach 1 in a fairly good condition (no dents or rust), but there are some minor things I need to complete the car. Any good ideas for serious webshops that carry Mustang II parts? -- Tomas Kristiansen

On Sun, 17 Jul 2005 01:25:59 GMT, "Jim Warman" > wrote: >Have a good one, hurc.... must **** you off to see people happier than >you... > >

Now that I've irritated a few people, but that subject matter is dear to my heart, in many ways.... I have a dilemma.... My wife's car - 97 Taurus wagon ( 3.0, vin U) has developed a nasty habit. While driving along, clear day, no precipitation, no heavy loads, etc..... The car jerks, as if...

I have a bolt in NEW 4 core radiator that I bought for my 67 coupe. I know it will bolt right in 67, 68...not sure about other models. I need $115 for it, and you pay the shipping. Thanks Mark --

My wife finds the passenger seat too low to see comfortably over the dash. I tried telling her she's not *supposed* to see over the dash, but she didn't like hearing that. I've put a sheepskin, folded, on the seat, but she's not wild about that either. The seat isn't adjustable for height as is...

This one will make you cry! My buddy Kim just finished putting the final touches on his Arizona, "never-been-rusted-or-hit" '68 convertible after a three year restoration. So what does he do? He goes for a drive. As he is leaving the Canadian Tire Gas Bar, the bozo in front of him puts his SUV into...

Can anyone tell me where to find a template or give me the measurements (location) of the holes for the rear spoiler on a 1969 Mustang Mach 1? Thanks Mel

I got a 2000 MustangGT Supercharge. I would like to know if anyone mit know how you can make the chip put out more horse power and how to set it. Thank you for any advice.

I have a fox body 85 Mustang GT 302 roller long block I'm putting in a = 67 Mustang. The 67 requires a front sump oil pan and pick-up. No problem. I have = both. Now, the fox body has a side mounted dip stick for the oil level check. = It interfers with the front sump oil pan mounting and would be...

Guys, I've bumped the timing on my 93 5.0 I set it by ear to the max I could run on 87 octane gas. Normally, the temps up here in Alberta don't get too hot, and 87 octane works nice at about 70F or 20C. Lately, it got up to the high 20s low 30s (mid to high 80s) and it was knocking under WOT at...

Though not a show aimed directly at the enthusiast, I have always enjoyed watching PBS's Motorweek. Recently, I've been trying to catch The History Channel's AutoManiac. I like it... it's a pretty good show. Has anyone else been tuning in? Patrick '93 Cobra

I have a 19383 5.0 Mustang trying to get oil pan out. Done everything by book but still not enough clearance to pull pan out. Have to replace gasket and front and rear pan seal. Any tips?

Here's a very cool website! Just make sure you have a lot of tissue on hand before you look. http://www.carsinbarns.com Patrick '93 Cobra

Here's an interesting article. --- In the hopes of eliminating possible disparities between a car's advertised horsepower figure and the power it actually delivers, the Society of Automotive Engineers (SAE) has updated its engine-testing standards. The specifications that define acceptable...

My 1966 289 Mustang has developed a habit of dying whenever I stop at a stop sign. It usually starts right up again but sometimes it takes a while. It does this whether it is hot or cold outside. It has an electronic distributor and coil from Mallory. The coil wire was burned so it was replaced,...

This AM while at the drag strip I was pulled off the line as the car was leaking coolant. (steady flow from the back of the engine area.) By the time I got back into the pit area the leak stopped and could not be located. Drove back into town (about 5 miles) and the leak started again. By the...

Just a Photoshop job, but interesting. http://www.blueovalforums.com/index.php?showtopic=19760 Patrick '93 Cobra

My daughter is looking at a '93 Cavalier. I would appreciate it if someone with a carfax account could look it up for me. Email me at if you'd like to help. Thanks

Hi, What are some good sites for the after market products for the 2005? Thanks