Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983 and it needs new glass, rubber seals, and floor pans. Who has the heaviest and/or highest quality floor pan replacement panels out there ?? ?? ?? thanx .. .. ..

Long story short, I picked up a 95 yj this spring, I tried 4HI on the test drive and it seemed to work. I got it running right and safe enough for the wife to run around town in a few days but got hurt at work and really have not had a chance to touch it again till today. So tonight I tried to go...

The others have covered the t-stat question pretty well - don't! As for the ping/knock, it only costs a little time to SLOWLY run a pint of water through the intake while keeping the engine at a fast idle. That will blast the carbon buildup off the heads and help with pre-ingition for hot...

I have an old ('84) CJ-7 that has mostly stock suspension .. .. only mod is a single add-a-leaf on all fours. It has a mildly built 350 small-block Chev. and a Tremac T-176 4 speed. It currently has 2.73:1 gears and 33X12.5R-15 BFG's. The effective gear ratio calculates to something like...

HERES A GOOD ONE! I'LL TELL MY WHOLE ORDEAL. I CHECK FREON IN MY 96 CHEROKEE SPORT AND P.S.I. WAS LOW (20) SO I BOUGHT A CAN OF FREON WITH 2 OZ OF OIL(PAG), LEAK DECTECTOR,SEALER,ETC. I ADD THAT CAN AND IT WAS STILL LOW. I ADDED ANOTHER CAN OF THE SAME STUFF THEN I GOT PROBLEM: P.S.I WAS WAY HIGH...

HERES A GOOD ONE! I'LL TELL MY WHOLE ORDEAL. I CHECK FREON IN MY 96 CHEROKEE SPORT AND P.S.I. WAS LOW (20) SO I BOUGHT A CAN OF FREON WITH 2 OZ OF OIL(PAG), LEAK DECTECTOR,SEALER,ETC. I ADD THAT CAN AND IT WAS STILL LOW. I ADDED ANOTHER CAN OF THE SAME STUFF THEN I GOT PROBLEM: P.S.I WAS WAY HIGH...

There's plenty of information on Jeep.com about it. So has anyone formed any opinions yet??

I'll start with the technical problem... but the story is too much to pass up. I drive a '98 TJ Sahara that I bought brand new and have now racked up 112,000 miles. I know that the clutch wears out and have heard some stories of these babies lasting 125k, but I planned to get mine serviced this...

Anybody know how to diagnose a Check Engine Light on a 98 XJ, 4.0l, Auto??? I spent the day wheelig with no issues. The family and I left on our pilgrimage to Wally World and half way there the check engine light came on. The jeep then wouldn't get out of 2nd gear. Any ideas?? I have a big...

Anybody know how to diagnose a Check Engine Light on a 98 XJ, 4.0l, Auto??? I spent the day wheelig with no issues. The family and I left on our pilgrimage to Wally World and half way there the check engine light came on. The jeep then wouldn't get out of 2nd gear. Any ideas?? I have a big...

WILLYS JEEP, 2--1950's Keychains: Honduras & Costa Rica http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7158742010

WILLYS JEEP, 2--1950's Keychains: Honduras & Costa Rica Dealerships http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7158742010

I tried to remove the negative battery cable so I could clean the corrosion off, but I couldn't loosen the bolt because it has a plain round head and it isn't a captive bolt. Does anybody know if there's a trick to loosening the battery cable bolts? This round headed bolt business makes me wonder...

I just started experiencing a rough idle on my 2001 Cherokee (78k miles). My engine light went on a little after that with the P0303 code. I just replaced the spark plugs, but that didn't help anything. I was thinking about changing the ignition coil or fuel injector. One other possibility I...

Whiles away the time the entertainment, makes an overseas friend, then understands other national the life, entertainment and so on. http://AmasingChina.info/en/lang101768about_xiezhaona.html http://AmasingChina.info/cn/lang101768about_xiezhaona.html comes from Russia to make friends the net to do...

Hello, I recently took both my rear brake drums off to inspect the parts. I noticed that the brake parts under one of the drums were filled with grease. My question is where did the grease come from? axle? Did i bust a bearing or seal of some sort? What parts do i need to replace? thanks!

Silly question... What modifications do i need to do to give my cj7 a wider wheel base and get the tires to sit out from the body a little? Simply longer axles? Thanks!

On Wednesday, July 1, 1998 9:00:00 AM UTC+2, YetiNight wrote: > Algun hispano aqui !! Por favor escribidme si teneis algun willy , yo > tengo un CJ-6. I have a 1978 CJ6. Just bought it and am looking at where to get a steering wheel and back seats (over the wheel well). My e-mail is...

On Sat, 12 May 2007 07:03:31 GMT, §qu@re Wheels > Amazingly Replied without Prejudice below: :> :>To the tune of "Strokin'," the late-80s strip club hit (and still going :>strong). :> :>If you know the tune, sing along, won't you.....? :> :>

On Fri, 06 Jul 2007 03:35:10 GMT, > Amazingly Replied without Prejudice below: :>On Thu, 5 Jul 2007 18:16:42 -0700, "L.W. \(Bill\) Hughes III" > Amazingly Replied without Prejudice below: :> :>No, no, you're the LIAR, and your the COWARD, and what...