I have a 2010 E450 and the left front turn signal is not working. In the dash it blinks fast. The rear light blinks but not the front one. The bulb is good. Can the relay single out just one light? > > Any suggestions as to what this might be or what to do next?

Drivers side cooling fan (radiator fan?) isn't working. Tested the fan and it's working. So I'm guessing it's the fan relay? Anything else that could be the problem? If it's the relay where is the damn thing located? I see what looks like 3 relays located under a cover between the passenger fender...

You may never need to remove your engine from your Miata (or any other car) but here's a method that's quick and works very well. http://www.youtube.com/watch?v=_gFlgRUbO7M -- XS11E, Killing all posts from Google Groups The Usenet Improvement Project: http://twovoyagers.com/improve-usenet.org/

The odometer on my 99 NB, triple black, rolled over to 200,000 miles on the way home from work yesterday. Here's hoping the car will last another 100k. -- TJH tjhiggin.at.hiwaay.dot.net

The manual of this car suggests that you go to your dealer re- this subject, but I only need to increase the coolant strength from its -17°c to cater for expected -18°c and basic instructions would be appreciated. The car is fairly new and I know how the radiator drains excess moisture into the...

My car is heating when in idle. Is it a fuse issue, not activating the cooling fans? 1992 Mazda Miata, standard. -- posted from http://www.motorsforum.com/mazda-miata/how-to-replace-a-fuse-in-a-mazda-miata-for-cooling-fans-25178-.htm using MotorsForum's Web, RSS and Social Media Interface...

I heard that the next model would be a collaboration with Alfa Romeo. But I also heard that the two cars would not be identical. Anyone have any links that explain how they wil be similar and/or different? Thanks D

Recently, i purchased a 1990 Miata with a problem of shifting. At times, out of the blue, it will not go into 1st. gear without turning off the engine. It will also not go into reverse unless i stop the engine. Most of the time it shifts just fine. The transmission engages with the pedal about an...

On Sunday, May 17, 1998 at 3:00:00 AM UTC-4, BODKAZOO wrote: > Anyone have general Miata info on what the word Miata means, if any thing.. Rod Bymaster, Mazda's head of product planning and marketing for the Miata project back in the early days, claims his "biggest contribution to the project was...

hi, i read my cel/mil codes just a couple weeks ago, (o2 sensor was replaced). the lite comes on again but now the data link connector doesnt want to give the codes up, i must have mung it u someway. i tried to "3m" the light green/yellow wire from #10 on the dlc and use a coat hanger to engine...

I'm shopping for new shocks for my 2003 Shinsen and need to know whether I have a "sport suspension" or not so I can pick the right shocks. Some of the options (like the AGX 4-way adjustables) won't fit a sport suspension. 2003s didn't have door jamb stickers showing the suspension, so...

hi, swmbo's 95 with a jr/sc has been stumbling at steady throttle, especially when cold, so i decided to solder the cam pos sensor and throttle pos sensor wires where the blower related wires had been 3m'd or crimped t ensure that was not the issue. well one lead came out of the cps and the tps...

Need to replace the aftermarket muffler on a 1990 Miata and just wanted to see what folks thought would be a good one. Hvae seen some of the catback ones on ebay, but not sure of the quality. thanks.

Hi Group! Go see the Top Gear guys drive a Miata (and a couple of other lesser cars) recreating the Three Wise Men's trip to Bethlehem! yrs jp

Hello, I've lost one of the hubcaps on my '91 Miata seven spoke wheels. These are the style with Mazda written on them. Does anyone have one that they want to sell? -Eric

Sorry if this is out of place, I could not find another Mazda group. I need to change the timing belt on my 99 626 4 cyl (80,000 miles). I am pretty decent at working on cars, I can do brake work (disks and drums) I always change my own oil, I have attempted a timing belt replacement on an 84...

hi, can anyone compare/contrast ping and knock? also, does one get more ping if the timing is more advanced or more retarded? thanks, peter

When I did this, I used a piece of wood and a staple gun to pull the slit in the top closed (press repair sections firmly together). Do it in such a way that once the goop dries, you can remove the staples. I used black RTV and it seems to have worked OK. Ken "Leon van Dommelen"...

Hi to all out there, I am new to this site and also new to Mazda MX5's. My partner and I have just perchased an old one as our second car. I am hoping that someone can give me some help with my starting problem. usually first thing in the morning it will start first time, after that your in the...

"Eric Goforth" > wrote in message ... > Hello, > > The wipers on my '91 Miata are pretty slow, even on the fastest > setting. Has anyone ever seen this? > > I searched and saw something on a VW list about cleaning and...