I really like the new (to me) C6 but the turn signal sound (tic tic tic) is so low it is just about useless. Its there something like an old fashion flasher relay that can be changed to increase the sound level of the tic tic tic. It is swamped out by the engine and dual mode exhaust. Are the...

I have a new (to me) 2008 C6 and the turn signals and Emergenrcy Flashers work but there is no tic tic sound. I assume the sound comes from the flasher but I have no idea how to located the flasher. Any help will be appreciated

Woman adding a quart of oil http://i.imgur.com/gpALGIH.gif

My 2001 C5 Black Coupe seems to be having age issues with only 56K on the clock. The starter failed in the Wall Mart parking lot. Long shaggy dog story but I had the starter replaced and that is good. I have a new issue with the left door lock. If I exit the vehicle and lock the doors with...

I am seeking to buy ground effects for my '84 C-4. Can anyone suggest a good website for used and/or new kits. What manufacturer do you recommend. Also what are some experiences with the installation and maintaining of them. Thanks,

Can someone help me figure out what the specs on rims for an '84 mean and what other rims are interchanagable. The specs that I have a 17X9.5 (+38mm, 6.7" backspace) 17X11 (+36.5mm, 7.397 backspace) 5 lug (5X120.64mm) Thanks for any help,

Will 1990 Corvette Rims fit an 84? Thanks

My '84 'vette's dash illumination does not work after I washed the car. The turn signal indicators and the high beam indicator stay on. Does this mean a bad ground at one of the lights? If that is correct what is the best way to check the ground at each light? Thanks for your help. Art

Hi everyone, I have a 2004 Corvette Coupe. I just passed 30,000 miles. It is time to get new tires. What kind of tires should I get? This is my all year round car. I was looking at Tire Rack, and I saw these Kumho ECSTA MX XRP RunFlat, but they are not all season. I do not want to bother...

I want to put LED taillights in an '84. When I hook them up as straight lights and remove the bulb lights from the circuit the turn signal flasher does not recognize them and the turn signal system reacts as a burned out bulf would make it react IE: turn signal light stays on without flashing. ...

My ductwork doors will not function, my air conditioning is working properly (fan and coolant). It appears that one of my vacuum lines are incorrect and the duct doors are 'stuck' closed. Can somone help me with a diagram of the vacuum lines for a 1984 corvette? Art

I have finally completed the total conversion. I enjoy the feel of the engine now and I can work on it myself. the hesitation problems have all been solved and it is running smoothly. The total cost was around $640 minus $250 for the parts I sold on ebay. Eldlebrock technical staff is just...

Hello All Again, After doing tremendous research I think the conversion is not very difficult as long as certain things are compromised. Please allow me to run these things by everyone for comment. 1. Emissions - 1984 was a very early stage of emission control and the components can be easily...

I need just a little advice about changing from crossfire fuel injection to a carburated engine on a 1984 C4. The intake and carburator shall be Edelbrock. My question is I have been told that I can continue to use the HEI distributator, is this possible? If it is I only have to change intake,...

This may sound like a real foolish question, I had a Mallory HEI distributator installed last year. My vete left me sit along the road, it just stopped running. From the tach connection on th edistributator there are 2 wires, one was taped (the insulation was stripped off) and I am wondering if...

I have a 1984 crossfire that the engine surges when not under powr usually in 14-1900 rpm range. The surge is audible but seldom feelable, the tack does not indicate the surge, I her it or sometimes feel it. This surge was there prior to installing a new cam, solids and lifters and rebuildng...

I must replace the cam in my '84 crossfire. I would like to install a 455 degree roller cam, can the crossfire fuel supply system handle that cam. I think it will add about 30 hp any comments welcome. Art

If anybody has a e-manual for an 82 Corvette I could really use the help. Specifically in relation to auto trans and linkage assemblies internal and external. Thanks Scott Asbill, California

My car only has first & park. Need some direction, manual is 200 miles away & I don't touch this car without reading first. Too easy & expensive to do otherwise (I have never been a chevy person & they are different) Scott Asbill

Does anyone have a shark project car for sale?