|
|
|
|
1 |
543 |
|
|
|
March 24th 07 09:36 PM
by brian
|
0 |
349 |
|
|
'03 power window problem by
Rick Olive
Driver's side door window in '03 Cobra vert stopped working (down
position, of course). Checked fuses and relays, all OK. Pulled the trim
off and peeled back the weatherproofing to see if something had come
loose, but the mechanism is all intact, everything is in it's rails with
no sign of any...
|
|
5 |
721 |
|
|
351 W question? by
[email protected]
What's a used 351 W in good running condition worth?
It was rebuilt 6 years ago and has 70k miles on the motor.
This is out of a 70 Mustang fastback. It has the following:
Edelbrock performer Intake with Holley carb.
MSD ignition.
Moroso 8 qt oil pan.
Comp cam with roller rockers.
|
|
5 |
371 |
|
|
1967 Cougar leaf spring problem by
ReddDawg
This may be a bit off topic here and if it is I appologize.
The car was sagging so we replaced the rear springs. New springs and
perch pads to be exact. Got it back together and took it for a drive
-
first turn to the right and I had tire rub on the driver's side.
Checked it and the driver's tire...
|
|
4 |
376 |
|
|
changing 2.3 to 5.0 by
J
how hard would this be to change motors and everything from donor car....i
have a 93 2.3 with a perfect body and interior and just bought 90 5.0 with
everything on it setup already...lowered suspension, 18 cobra R's, 5.0
rebuilt and modified along with automatic with shift kit and stall...
|
|
6 |
436 |
|
|
|
|
2 |
360 |
|
|
One more week 'til Spring by
dwight[_1_]
Wednesday was sunny and 70.
Today, we have 2" of sleet and frozen rain, with a generous coating of ice
everywhere. May change to snow overnight, with a layer of rain over all.
Tomorrow will be a fair amount of scraping and shovelling.
East coast Mustangs are going to delay their Spring bloom...
( 1 2 3)
|
|
29 |
1,698 |
|
|
XCal 2 by
Tony[_9_]
I am looking for an XCal 2 with some custom 'tunes' for my completely
stock 06 GT Convertible (automatic)... I am trying to decide between
Lidio of Alternative Auto and Bamachips.com..
If you have an opinion on 'who' please include 'why'...
Thanks!
Tony
|
|
1 |
369 |
|
|
93 Mustang LX 4 Cylinder Power Door Locks by
[email protected]
I recently got a 93 Mustang, but my power locks don't work. I
can't even push down the locks manually. I also have a nice stereo
system in it and I don't exactly live in the best part of town. I
hope that it's an easy fix, maybe a bad fuse. I don't have the owner's
manual or the fuse box layout,...
|
March 20th 07 04:23 AM
by jjj
|
1 |
436 |
|
|
I need advice from all the great Mustang owners. by
[email protected]
I really love Mustangs. The way they look, the heritage, just
everything. I'm from a small town, and around here it's all about drag
racing the quarter mile... illegally. I want to buy a Mustang GT so
bad, but I'm concerned that it won't be fast enough to hang with some
people around here. Let...
( 1 2)
|
|
10 |
1,313 |
|
|
The Ontario Esso refinery fire = gold mine by
Rich
They had a fire at a refinery in Ontario Canada about a month ago.
The price of gasoline went from $0.74/litre to $1.00/litre (about
$1.03 per American gallon increase). Now, I don't know what the cost
of the fire was to Esso, but the higher cost due to shortages netted
Esso, Shell and Petro...
|
|
1 |
497 |
|
|
VIN research by
Ðavïd
¿Could someone whom has access to Car Fax or some other VIN research
run a check for me?
I'm looking at a 1998 Mustang V6 5-speed black with 73,000 miles.
It's suppose to be owned by the second owner. He says the car was
rear ended and the pushed the car into a car stopped in front. Both
front...
|
|
6 |
635 |
|
|
1995 Mustang: Wipers Won't Turn Off! Any Ideas, Please? by
Howard Juneau
Vehicle:
1995 Mustang Coupe, 3.8L 6-cyl, auto
Symptoms:
Wipers run continuously as long as ignition switch is not turned off unless
wiper fuse is removed.
The wipers run at low speed if the switch is in the off position, the
intermittent position or the low speed position. The wipers run at...
|
|
4 |
591 |
|
|
1998 Mustang A/C Problem! Help! by
bluefish2007
OK... here goes (I apologize for the length of this post)
1. Last fall I washed the engine on my 1998 3.8L v6 Mustang using the
usual
engine cleaning foam.
When finished I noticed air no longer blew from the ac/heater vents
but only
from the defrost vents. I poked around and discovered a vacuum...
|
|
2 |
565 |
|
|
67 power steering cylinder by
[email protected]
I am going to be pulling the power steering cylinder off my 67 mustang
this next week for a rebuild due to it leaking. Wondering if there are
any things to watch out for or if it is pretty much straightforward.
Any step-by-step process to make it easy as possible?
Thanks
|
|
1 |
396 |
|
|
'70 Mustang tach dash conversion question by
lxixboss
I found a 1970 Cougar carcass with a tach dash. I took the tach and
have jerry-rigged it to my '70 Mustang's instrument cluster. Looks
good with the white face overlay. I've grounded the back of the tach
to the car's chassis and have run one of the two leads to my ignition
switch for power and the...
|
|
1 |
445 |
|
|
Car weight by
goodnigh
Want to purchase a Demon carb and they want the weight of the car.
What does a 1971 Mustang Grande with 351C 4V and toploader weigh?
Can't find it in the manuals.
mike
|
|
9 |
797 |
|
|
1989 mustang GT convertible question...... by
c palmer
top needs replacing. can't find info on replacing it. i can order all
kinds of tops, but they don't supply the information needed. i'm sure
that i have more than enough tools, so that is not the problem.
i called ford and was told that everything now is in the computer and
they don't use...
|
|
1 |
494 |
|
|
My car got FLAMED! by
John S.[_1_]
Ok... realize not everyone is into flames...
http://www.v6john.com/Main/Appearance/MRT_Airbrush/airbrush.htm
john
|
|
5 |
707 |