Hi Group, I have a '72 mach 1 and whoever owned it before me cut the wires for the sport lamps. I need to trace back and find out how they're supposed to be wired correctly. My question is: Is there supposed to be a separate switch for the sport lamps, or do they

Does anybody know how wide of a tire will fit the rear of the GT 500 if the wheels are changed to 20"x 10" ? The car really needs more traction than stock not less.

Anyone recommend an oil for a 1972 351C-4V? I know the oiling system is poor to begin with. It is only for summer driving in Chicago (over 40F). I was thinking either 10W-40 or 20W-50? Any recommendations? How about synthetic or conventional?

"Susan" > wrote in message ... > Here are my options: > > 2005/2006 USED/New V6 Vert.... > 2005/2006 USED/New GT > > (No way I can go used/new 2005+ GT+Vert...) > > Pre 2005 USED GT with a Vert....

Want to get a BG Demon for my '71 M-code. My mechanic tells me to get the mechanical secondary instead of the vacuum job for a quicker response. The car is a daily driver although I jump on it now and then :) Any thoughts on a mechanical vs. vacuum secondary? There is a $110 price difference. $50...

greetings folks, ok, where can the absolute best price for a new one of these animals be found? I live in the tidewater Virginia area but will travel for a great deal. Has anyone actually gotten at or near MSRP, which is around 29k I think? Know of any great promotions to be had? Seems like Ford...

On 11 Jun 2005 16:11:24 GMT, elaich > wrote: >Email . Include entire abusive posts, including headers. >Enough emails and they'll shut him down. elaich thats abuse@telus hurry people have beiing doiing that for years

I'm looking into getting a Mustang rebuilt from scratch in the US but was wondering if anyone knows of local Australian mechanics / shops who offer the same?

flatfish+++ wrote: > On Sat, 05 Aug 2006 18:29:41 -0400, Steve Gerbino wrote: > > > I'm shopping!! > > Ok > > > So my question is, how good of a performer is the V6 in the "fun to drive" > > category? >

I wonder why Saturn wasn't killed too? GM to pull the plug on Pontiac The brand credited with originating the muscle car will no longer be part of GM's future, according to a source. By Peter Valdes-Dapena, CNNMoney.com senior writer Last Updated: April 24, 2009: 4:39 PM ET The Pontiac G8...

I changed out my ATF a month ago (manual trans on 2000 GT). Don't think I put in too much since I let the excess drain out of the top hole while the car was flat. All the bolts are super tight. No sign of leaks around the shifter. For some reason, there is a very strong smell of ATF inside the...

I just replaced the rack in my 88 and then the car was wrecked. I pulled the rack out before it went to salvage yard. $35 for it. Located in Tempe, AZ jimnaz -at- cox-dot-net Also have gas tank, cat converters and pipe, center console, plus two sets of doors, one set dark red, other set dark...

lmfao hurc ast

I have purchased a 2000 model, but the tires that are on it are not for winter driving up here in Minnesota. I have called a couple of the local scrap yards and they do not have any rims. Looking for reasonable priced rims / tires. Prefer stock. Any help is appreciated. Thanks mike

I just picked up a 91 LX 5.0 auto. The question i have is exhaust. The guy that owned it before had taken it to a exhuast shop for custom duals. it 2.5 inch pipe from the factory headers back no X pipe or anything. Was wonderin if i should put one on or leave the way it now.

Please let me know if you need Vin# check with CarFax. I can do it for $5 by paypal email:

Have a C4 in a Fairlane that's leaking from the case at the shift lever assembly. Any opinions as to what the root cause probably is and what can be done about it? Losing probably a quart a week or so. Thanks.

Just picked up a set of like new 2K3 Mach 1 wheels for a few bones. The magnum 500 look. I'm going to install them on my '69 Mach 1 using 1" to 1.25 wheel spacers. -- Mark -- "I was thinking of the immortal words of Socrates who once said, "I drank what?". " Val Kilmer in Real Genius.

Happy Nailhead Day (4/25), Hemi Day (4/26), FE/Rat Day (4/27), Cobra Jet Day (4/28), and Boss 9 Day (4/29)! 180 Out

I put a few pictures of the Mach 1 over in alt.binaries.pictures.autos if anyone is interested -- John - ThunderSnake #59 '69 Mach 1 w/ 390 4V Wide Ratio Toploader 3.25 Traction-Lok Acapulco Blue