Quartz AA Clock Movements Set With Poiters. The movement is approximately 2 1/8 " x 2 1/8" x 1/2" Which makes it suitable for a wide variety of clock styles. Items Price : $3 See the picture at http://mostz.com/clock

Hello, All! I screwed up when I installed a new MC and didn't bench bleed it. Have bled the brakes but pedal is still spongy so I suspect there is air in the MC. So question is, should I remove it from the car and start over, or is there another way to remove the air? What about a pressure...

I have a 72 super beetle and I wondered why every time i turned the switch it blew a fuse. So I found out the it was the wire from the warning lights that connect to the fuse box so i disconected that wire from the fuse box and the turned the key and it didnt blow the fuse so now i know what...

I have to split my case to replace the crank. Are there other things I should automatically replace or should I measure and check things individually? This is my first lower end, splitting the case rebuild. It's a 67 engine 'H' case with 85.5mm pistons making it a 1600cc. tia, --

Hello, I am having a heck of a time getting a smooth idle out of this thing. Here is current jetting: Idle 55 Air correction 115 Main 135 Timing is at 7.5 btdc at idle. with this set up and the choke on, out

I have a aircooled.net SVDA for any later motor using the 34 pict 3. developed to remedy the idle issues one has when using the 009 with the 34 pict 3. better mpg, smoother acceleration, yada, yada. Check the website for info. I mistakenly bought this for my 40hp bug not knowing that the vacuum...

I've just installed a new starter and it only engages with the flywheel about 50% of the time, the rest of the time it just spins. I guess the solenoid is not doing its job - I seems its is just sticking sometimes. Is this something that may sort its self out so I should give it a bit of time or do...

1973 Beetle. Started having starter troubles before I put car away for winter. If I turn the key it may take several seconds for the starter to engage. I've replaced the ground cable and cleaned all battery connections. Have good voltage at the starter. I can short the starter at the terminals and...

Hi I have a VW kombi and Alfa Sud Sprint 1.5 and want to fit the gearbox and gearbox the Kombi. I am woundering can the crown wheel and pinion be reversed on this gear box so I can put in the rear. I know it can be done on a VW gearbox and have done before for a customer. Any help would be...

1971 VW Super Beetle Convertible, Green with Tan top. New tires and battery. Garaged year round. Bought from orginal owner and only driven less than 200 miles a year. Located in Rogers, Arkansas. Asking $ 8,500 or best offer. Pictures can be sent via e-mail. Must sell !!!!!!!!!!

The Car and Deep Cycle Battery FAQ has been updated. The most current version is 5.6 and can be found on www.batteryfaq.org.

So much for period, Replaced the ignition switch after having to replace the turnsignal and wiper switches because of my stupidity taking them out, messed em up. Problem still exsists. Guess I'll clean the connections on the starter next

Hi all, I haven't posted for awhile, my project car was stabled for the winter. 72 SB. But it's back out and I just got it legal finally so now I'm going to start driving it. So that's why I would ask for your feedback on this issue, just to get ideas. I'm slightly concerned that it could...

Hi all, some of you might remember me having a gas smel in the engine oil, I've replaced the oil, but after maybe 100/150km the smel was back. Also, when i started the bug it fired up and died immediately, after the second start she fired right up and kept running... this happened all the time...

I posted this befo more important now. I have three bodies full of parts (new & used) 60 miles above Atlanta off of I-85. They need to go. My friend (the owner) says to pull the good parts & haul them for scrap, if no one wants them. The parts are also FS. Email me if you're looking for a good...

Has anybody fitted belts in the rear of a Type 2? If so, what belts did you use, anchoridge points etc. TIA, Mark

Thanks to all those who have offered advise and answered questions about my Bugs. I just got my 91 autostick super bug/beetle out of the shop. Cost just over 1500. With most of that in labor (47 Hours 940 dollars) . Has new Master Cyliner, Wheel Cylinders, Brake Pads and Shoes, Better Drums. ...

I forgot to mention that the Sunbug I am looking for information on is a 1974 Convertable. Thanks -- VW Lover Message posted via CarKB.com http://www.carkb.com/Uwe/Forums.aspx/vw-air-cooled/200605/1